Classic (Acetone based) Arming Putty (20ml)

Putty with organic solvents specially designed to cover joints and defects on your models. If necessary, it can be diluted with Extra Thin Cement A.MIG-2025 or with Odourless Enamel thinner A.MIG-2019 and applied with a brush. This formula will not shrink and dries in 24 hours. It can be sanded to obtain a smooth and very resistant surface ready for engraving and painting. Clean your brushes and tools using the Odourless Enamel Thinner A.MIG-2019.
1 - To seal and eliminate the joint between pieces, the ideal product is Arming Putty Classic A.MIG-2040. First of all, always level the two parts as well as is possible with files and sandpaper.
2 - By using a spatula, you can easily extend the Arming Putty Classic A.MIG-2040 along the joint line. It does not shrink and perfectly adheres to the surface of the plastic.
3 - To dissolve the Arming Putty Classic A.MIG-2040, simply use Enamel Thinner A.MIG-2019 or use Extra Thin Cement A.MIG-2025 if you want to reinforce the adhesive strength.
4 - This also allows you to apply the putty with a brush in a more fled way.
5 - The Arming Putty Classic A.MIG-2040 does not contract or shrink when drying unlike other putties, and dries to a hardness very similar to plastic so it can be sanded perfectly level.
6 - The final result after polishing the area with a 2000 grit sandpaper is a smooth and uniform surface, ready to be painted.