All Products

..

This set contains details for the Hood, rails, radars type 279 and 284, boat davit details, pom-pom detail parts and more for the Trumpeter 1931/1941 kit and Tamiya kit. Inclined ladders which can be separately purchased from set: TOM-754..

This set includes: 3-bar Railing Stock, 2-bar Railing Stock, Anchor Chain, Vertical Ladder Stock, Main Boat Crane Rigging, Mainmast Top Yardarms, Aircraft Crane, Aircraft Crane Rigging, Crane Hook, Funnel Cap Grille, Mainmast Starfish Platform, Mainmast HACs Conduit, Admiral's Stern Walk Supports, A..

For the excellent IHP kit and older HP kits. Contains deck edge netting, radio masts, crane booms, custom and general rails, crash barriers and more. Extra radar antennas are included to allow for the variations within the ships of the class and to help convert the kit to the ships of the Majestic c..

..

This set contains: 1,750 scale feet of 3-bar rails, 115 scale feet inclined ladders, 230 scale feet of standard width vertical ladders, and 230 scale feet narrow vertical ladders...

The set includes parts for Wair and LRE conversions. This set contains railings: standard 3-bar, 2-bar platform, close stanchion, foc'sle, shaped hull step, and gun platform; vertical ladder stock, 290/291 radar antenna, anchors, short, medium and long depth charge rails, anchor chain, bridge wing a..

This set contains: 3-bar Railings, 2-bar Railings, 8 barrelled Pom Pom Assembly, .5" Quad Machine Gun Assembly, 27' Whaler Thwarts and Oars, Main Crane Base, Aircraft Crash barrier, Bridge Roof and Windscreen, Bridge Roof Platform Brace, . Crane Hooks, Main Crane Jib, Crash barrier Deck Plat..

This set contains catapults, cranes and more...

Contains the generic fittings for the Airfix Campbeltown, Cossack, Hotspur, Manxman & Suffolk. You will need one set for each of these kits, plus one PE 630, which will cover all of the above kits. Contains: 2 bar railing with closer stanchions at one end, 3 bar offset railing, 3 bar standard railin..

This set contains all the specific parts for the Airfix Victorious, Fearless, Devonshire, Leander, Tiger, Amazon and Daring. You only need buy one of these sets to cover all of these kits, but for each model will need to buy one PE 625, which contains the more generic fittings such as rails.Contains..

Contains the generic fittings for the Airfix WWII German subjects. You will need one set for each of these kits, but only one PE 626 or PE 633 for all the kits they cover. Contains: Standard 3-Bar Railing, Three Quarter Bulwark Handrail, 2-Bar Railing, Half Bulwark Railing, Single Bar Railing, Circu..

It includes vertical and inclined ladders, and catwalks. This set contains: 112 scale feet Inclined ladders with handrails, 50 feet of double width inclined ladders with handrails and centre handrail,230 scale feet of vertical ladders with handraills, 2 x boarding ladders and platforms with handrail..

Contains: Rails/mesh for stern walk, Canopy and support struts, Jack & ensign staffs, Stove pipe type chimneys, Copper life buoys & racks, 3 x boarding ladders and davits, Davits for the 10 davit mounted boats, Boat Chocks, Loading davits, 2 x stream anchors, Range Clocks including numbers! Crucifor..

Designed to fit the Airfix kit for a late pre-war/early WWII fit. Contains: Crane Jib, Crane Turntable, Crane Cab, Foremast Rigging, Mainmast Rigging, Funnel Cap Grill, Upper Funnel Siren Platforms, Catapult Turntable, Cutter Cradles, Catapult, Aircraft Launch Trolley, Accommodation Ladders, Catapu..

This set contains 3 bar rails and vertical ladders...

This set contains 1900 scale feet of rail, and 130 scale feet of ladder...

The set contains railings and ladders, the compass platform, crane booms, ratlines and other parts...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...