Scenics & Diorama

The MD-3 ground power unit was used throughout the 50s and 60s to generate electric power for starting such USAF aircraft as the B-47, T-33 and others with the same power requirements. The master parts of our kit have been 3D designed and produced on a 3D printer. The set also contains a PE fret and..

Resin cast transport trolley designed to fit model kits of the observation and reconnaissance Romeo Ro.43 and fighter Romeo Ro.44 float biplanes. This set gets back to offer as the SH48240 Romeo Ro.43 'Spanish Service' has been re-released recently...

High pressure air starter unit used for starting an aircraft jet engine by means of high velocity air generated by a small turbine inside the cart. The MA-1A cart was in service since the 1950s and and was used to start number of US jet engine aircraft such as the T-33A, T-38 and many others too, an..

..

..

..

..

..

To quickly build temporary runways, US engineering services built various options for the airfield. Aerodrome steel plates were M8A1 used in the Vietnam War in the second half of the 1960s and early 1970s and were installed by engineering units of the US Army. Plates were connected to each other eit..

Dimensions: 40cm x 30cm..

M8A1 US Landing Mat (210x336 mm)The M8A1 steel plates, developed by the US Army Corps of Engineers, were primarily used for the quick construction of temporary runways. These plates were extensively used during the Vietnam War in the late 1960s and early 1970s, particularly in army aviation for ba..

A plastic model of a bomb truck used on Allied airfields during World War II and well into the 1960s. The kit contains parts for four carts, decals and a sheet of photo-etching...

The US Norden sight was installed in all American bombers during World War II. war. The kit contains three resin parts...

1/72 US NAVY MHU-191/M (AERO 21A) Munitions Transporter (with adapters for Missiles) (Carrier Fleet, C-130)..

1/72 US NAVY MHU-191/M (AERO 21A) Munitions Transporter (with adapters for bombs) (Carrier Fleet, C-130)..

MJ-4 "Jammer" (MHU-83 B/E) Early lift truck UPPER loading position (3D Printed model kit) (1/72)..

MJ-4 "Jammer" (MHU-83 B/E) Early lift truck LOWER loading position (3D Printed model kit) (1/72)..

MHU-83 (D/E) Late lift truck UPPER loading position (3D Printed model kit) (1/72)..

MHU-83 (D/E) Late lift truck LOWER loading position (3D Printed model kit) (1/72)..

..

MHU-83 D/E Late lift truck UPPER loading position (3D Printed model kit) (1/48)..

MHU-83 D/E Late lift truck LOWER loading position (3D Printed model kit) (1/48)..

1/35 US NAVY MHU-191/M (AERO 21A) Munitions Transporter (with adapters for Missiles) (Carrier Fleet)..