CMK

Germany entered the war with two types of G7 torpedoes of standard calibre of 53.3cm. The G7e version was powered by an electric motor which means that there were no trace of the torpedo on the water surface and it also helped to conceal the submarine. There were also disadvantages of the electric d..

A Wellington crew of three comes in this set, the pilot portrayed sitting in his seat, leaning out of the window and chatting leisurely with the other crew member standing beneath the machine, holding his chute. The third aircrew is leaning against the fuselage bulkhead peering into the cockpit. The..

The MD-3 ground power unit was used throughout the 50s and 60s to generate electric power for starting such USAF aircraft as the B-47, T-33 and others with the same power requirements. The master parts of our kit have been 3D designed and produced on a 3D printer. The set also contains a PE fret and..

(Type: model figures) This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

..

For the new Revell U-boot IXC model we have prepared a couple of interior sets. One of these is N72022 Galley set. Three detailed crew figures of German submarine sailors, cooks hard at work preparing the food, can be placed into this area...

This highly detailed set covers the front torpedo section with crew bunks. Set contains 2 torpedoes, 6 hammocks, 4 closed torpedo tubes, 2 watertight bulkheads, torpedo loading shaft with watertight hatch and floor. This set is intended for the new Revell 1/72 scale U-boot Typ IXC...

This highly detailed set covers the front crew quarters section. Set contains 3 bunks, personal lockers, watertight bulkhead with sealed doors, watertight bulkhead with manhole hatch and floor. This set is intended for the new Revell 1/72 scale U-boot Typ IXC...

This highly detailed set covers the submarine's command section, the heart of the submarine. Set contains 2 watertight bulkheads with sealed doors, floor, ladder to the coning tower with watertight hatch, lower part of the periscope, controls for diving planes and powerplant. This set is intended fo..

This highly detailed set covers the Captain's and officers' ward rooms. Set contains 3 ward rooms, 5 bunks, personal lockers and tables, watertight bulkhead with sealed door, bulkhead between particular ward rooms, watertight bulkhead with manhole hatch, operation room with sonar and radios and floo..

..

Yet another of the world's best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, larg..

Highly detailed set for the compartment with diesel engines that propelled the submarine on the sea surface. The set contains the engine section floor with an alleyway between the engines, two pressure bulkheads with hatches and water-tight doors (with option to leave them open or closed), air-distr..

These three WW II German submarine sailor figures were prepared to accompany the new Revell U-boot Typ IX. The standing sailors are unshaved due to the long voyage. One of the sailors stands in casual pose, the other two stand still. Except of the separately cast heads, all figures are cast in one p..

The late series of the Hawker Typhoon employed a four-bladed propeller unit that can be found in the Airfix kit. However, the majority of Typhons were still fitted with the earlier style three-bladed prop which comes now in the form of this 3D-printed set. And as the prop hub oozes with detail, we a..

3D-printed tailwheel and leg have much better detail levels than the original styrene parts of the model kit...

These figures depict US Army soldiers, members of the Infantry Squad 2nd Division on a patrol somewhere in Afghanistan. Two of the figures are kneeling, carrying a breathing apparatus and a MOLLE ruck sack and they are also pointing their SOPMOD M4 carbines forwards. The third figure is portrayed as..

Enhance the look of your new Special Hobby Mirage F.1B model and of course not only this one by addition of a set of figures. This set offers two Mirage pilots and one ground crew member...

This set brings completely new main undercarriage wheels. The master parts were created using 3D and produced on a 3D printer. The wheels offer much higher levels of detail than the original parts, tyres come with better tread pattern. Can be used with any ICM's Fw 189 kit, i.e. A-1, A-2 and A-1 Nig..

This set brings two nicely detailed Martin Baker MB 8LC ejection seats designed for an Airfix kit of the British Tucano T.1 aircraft. The seats are cast as one piece along with the pilots' harness...

The Airfix Short Tucano four-blade propeller repair kit offers separately cast propeller blades and a propeller cone of the correct shapes...

A 3D-printed set offering a standing RAF pilot with his pet dog and an RAF mechanic handling a accumulator trolley. While the set has been designed for Airfix's Tempest Mk.V, there is no issue employing it with basicaly any other RAF fighter plane of the mid to late 1940s...

For those of you longing to build Airfix's new Tempest model with its power unit and fuel tanks exposed and at the some time not to loose the large radiator housing, a characteristic feature of the Tempest forward fuselage, we have now this 3D-printed set with really high levels of detail throughout..

Set contains highly detailed wheels with particular tire tread pattern used on SS-100, spare wheel and front wheel suspensions for WW II German tow tractor. This set will help you quickly enhance the new Special Armour kit SA72001...