Flying Leathernecks
Brand: Flying Leathernecks
SKU: FLM32-9
Designed to be used with the Fisher Model and Pattern conversion for the Trumpeter A-1H/J..
US$6.20
Brand: Flying Leathernecks
SKU: FL32-2006
This set contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D.These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782.This set of pylons corrects the inaccurately shaped pylons included in the Academy k..
US$23.02
Brand: Flying Leathernecks
SKU: FLV32006
Cut in holographic vinyl to replicate the windows on the seeker head of the pod. Simply peel and stick after pod has been painted, decaled and weathered. Enough pieces for six pods are included.Designed for the pods included in the Academy F-16CG/CJ kit. Will work with other similar pods...
US$6.20
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2075
This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.CAD by Craig Sargent..
US$7.39
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2043
Set of four (4) 3D printed launchersThe LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft...
US$7.39
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2090
This set includes four (4) missile launchers in medium gray 3D printed resin.Missiles come as shown with print supports removed. Some very minor sanding to smooth areas where supports were located may be necessary.Launchers designed by Richard VanZandt of Flight Line Resin..
US$7.39
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2061
Set of 16 correctly sized and shaped pitot tubes for use on the Legacy F/A-18, F-14, A-7, F-8, AV-8B and several other aircraft that use this style of pitot tube.3D printed and lightly supported for easy removal from block...
US$7.39
Out Of Stock
Brand: Flying Leathernecks
SKU: FLV72003
Designed to be used with the Hasegawa kits, this is a simple to use and inexpensive way to replicate the strap applied to the bottom of the fuselage. Should also work with Fujimi and Revell Phantom kits...
US$6.20
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2014
Designed by Craig Sargent, this piece corrects the misshaped nose on the Hasegawa 1/72 scale kit. This is a direct replacement for the kit parts with minimal clean up required.Part comes as shown in photo..
US$9.75
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2063
Designed by Richard VanZandt, this set includes 10 pylons.There are two options for the outboard wing pylons. One set has the BRU-36 ejector rack for loading ordnance, and the second set has the adapter for use with the LAU-7 (use FL172-2042).Designed for use with the Hasegawa kit, they should w..
US$11.79
Out Of Stock
Brand: Flying Leathernecks
SKU: FL172-2002
The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Dream Model AH-1Z kit..
US$6.20
Out Of Stock
Brand: Flying Leathernecks
SKU: FL48-8038
Set of four (4) 3D printed launchersIn September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4.In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5.The LAU-7/A-5 was the launcher used when two VF-41 F-14..
US$9.75
Out Of Stock
Brand: Flying Leathernecks
SKU: FL48-8037
Set of four (4) 3D printed launchersIn May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1.In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2.By 1972, the launcher was re-designated as the LAU-7/A-3 ..
US$9.75
Out Of Stock
Brand: Flying Leathernecks
SKU: FL48-8036
Set of four (4) 3D printed launchersThe LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.Our sincere thanks to Gerry Whiteside and Bill Arndt for their ass..
US$9.75
Out Of Stock
Brand: Flying Leathernecks
SKU: FL48-8109
3D ResinThis set includes six (6) highly detailed and accurate IFR probe tips for use on all US and NATO aircraft that use the hose and drogue system...
US$7.39
Out Of Stock
Out Of Stock
Out Of Stock
Brand: Flying Leathernecks
SKU: FLM48-45
Designed for the Hasegawa series of kits, enough for one aircraft...
US$6.20
Out Of Stock
Brand: Flying Leathernecks
SKU: FLV48009
This set contains pre-cut self adhesive vinyl Det Cords for the forward and aft canopies. Designed to fit the Kinetic / Wolfpack Design kits.Transfer tape included and pre-attached...
US$6.20
Out Of Stock
Brand: Flying Leathernecks
SKU: FL48-8098
This set includes two (2) ailerons and two (2) elevators for the Special Hobby kit. These are direct replacements for the multi piece kit parts.CAD by Craig Sargent..
US$9.75
