The Scale Modellers Supply 2KPARTB Ultra Clear Coat 2K Part B Hardener Only (35ml)

Ultra Clear Coat Part B (Hardener), 35ml only. Part A and thinners are not included.

Mix 2 parts Part A with 1 part Part B, then add 10% thinners. Example: 10ml Part A + 5ml Part B + 1.5ml thinners. Mix only the quantity required; once combined, the mixture becomes unusable within 30-40 minutes.

Part B has a shelf life of 6 months after opening.

Apply a light mist tack coat and wait approximately 5 minutes, then apply an even wet coat. If required, apply another wet coat after a further 5 minutes. Allow 24 hours to harden and cure.

At 20-22 degrees C: dust-free after 30 minutes, tack-free after 12 hours, fully hardened after 24 hours. Allow at least 24 hours before polishing or buffing.

SAFETY: Contains isocyanates. Vapours and spray mist are harmful if inhaled and may cause irritation, headaches, nausea or dizziness. Use PPE rated for working with isocyanates and ensure adequate ventilation. Read the safety data sheet and the manufacturer's handling guidance before use.

Keep out of reach of children. Store in a cool, dry place.