Barracuda BC-72001 1/72 P-47 Thunderbolt Part 1 Decals
Out Of Stock
"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early cowl flaps style and Curtiss Electric narrow blade propeller.
"Wela Kahoe" P-47C-5-RE, serial number 41-6538. 334th FS, 4th FG, 8th Air Force. Shared by Capt. Bill Hollander and Capt. Stanley Anderson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early cowl flaps style, Curtiss Electric narrow blade propeller, and no wing pylons.
"Dallas Blond" P-47D (subtype unknown), serial unknown. 319th FS, 325th FG, 12th Air Force. Flown by Lt. Don Kerns. Lesina, Italy, early 1944. Wathered Olive Drab and Neutral Gray. Carried two Olive Drab painted P-38 drop tanks on wing racks. Note weathered Olive Drab finish with darker area on the nose (fuel staining or repainting), Curtiss Electric narrow blade propeller with stencils but no prop logos, and lack of data block on fuselage under the windscreen.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
"Wela Kahoe" P-47C-5-RE, serial number 41-6538. 334th FS, 4th FG, 8th Air Force. Shared by Capt. Bill Hollander and Capt. Stanley Anderson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early cowl flaps style, Curtiss Electric narrow blade propeller, and no wing pylons.
"Dallas Blond" P-47D (subtype unknown), serial unknown. 319th FS, 325th FG, 12th Air Force. Flown by Lt. Don Kerns. Lesina, Italy, early 1944. Wathered Olive Drab and Neutral Gray. Carried two Olive Drab painted P-38 drop tanks on wing racks. Note weathered Olive Drab finish with darker area on the nose (fuel staining or repainting), Curtiss Electric narrow blade propeller with stencils but no prop logos, and lack of data block on fuselage under the windscreen.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/72 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
| Minimum Age | 14 Years |
- Stock: Out Of Stock
- Reward Points: 10
- SKU: BAR BC-72001
Barracuda
MRP: US$9.13 Save: US$1.14
12% OFF
US$7.99
(incl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.