Model Planes

3D printed resin. Comes on printing supports which need to remove...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

Set of four (4) 3D printed launchersThe LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft...

Set of four (4) 3D printed launchersIn January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6.Over the course of the next several years, numerous AAC's changed the designation of the launcher to B/A, A-7, B/A-1, as well as a few others. How..

This set includes four (4) missile launchers in medium gray 3D printed resin.Missiles come as shown with print supports removed. Some very minor sanding to smooth areas where supports were located may be necessary.Launchers designed by Richard VanZandt of Flight Line Resin..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

Photo etched stainless steel #NOTE: The set does NOT include a model kit...

Set contains photo etched parts/clear film#NOTE: The set does NOT include an aircraft model kit...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

Set FL172-2000 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and B.They not only correct the shape of the kit pylons, they provide details unmatched by the kit supplied parts. All pylons are 3D printed and require little clean up to remove the..

Set of 16 correctly sized and shaped pitot tubes for use on the Legacy F/A-18, F-14, A-7, F-8, AV-8B and several other aircraft that use this style of pitot tube.3D printed and lightly supported for easy removal from block...

This item includes 2 sets of stiffening plates applied to the left side of each vertical tail on F/A-18A/A+ aircraft in use by the USN, USMC, Canada, Australia and Spain.Made of self adhesive vinyl, they will work with both Academy and Hasegawa 1/72 Kits...

Designed to be used with the Hasegawa kits, this is a simple to use and inexpensive way to replicate the strap applied to the bottom of the fuselage. Should also work with Fujimi and Revell Phantom kits...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1..

#NOTE: The set does NOT include a plane model kit. Contains stainless steel PE & resin parts. Includes 3 different wheels..

It contains 10 resin parts...

Designed by Craig Sargent, this piece corrects the misshaped nose on the Hasegawa 1/72 scale kit. This is a direct replacement for the kit parts with minimal clean up required.Part comes as shown in photo..

Designed by Richard VanZandt, this set includes 10 pylons.There are two options for the outboard wing pylons. One set has the BRU-36 ejector rack for loading ordnance, and the second set has the adapter for use with the LAU-7 (use FL172-2042).Designed for use with the Hasegawa kit, they should w..

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Dream Model AH-1Z kit..

Vinyl Detail..

Set includes 3D printed engine and cast resin cowling parts, PE partsEngine comes with supports removed..

Set of four (4) 3D printed launchersIn September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4.In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5.The LAU-7/A-5 was the launcher used when two VF-41 F-14..

Set of four (4) 3D printed launchersIn May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1.In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2.By 1972, the launcher was re-designated as the LAU-7/A-3 ..