Microscale MI-7 Micro Mask - Liquid Masking Medium

Micro mask is like masking tape in a bottle. Just apply it with a brush, let it dry, and cut it to any shape you want with a sharp-pointed knife. Peel out the part where you want to paint, leaving an outer stencil mask, and paint with the method of your choice. Just don't use a water-based paint over it because micro mask is water soluble, so use solvent-based paints. You can paint the finest detail you can cut with a knife. Unlike masking tape that can allow paint to go under it, even the most difficult designs come out sharp and clean with micro mask. Instructions:
1. Make sure all paint is completely dry and surfaces are clean. Use of petroleum based paint on top of Micro Mask is recommended (other types should be tested before using on you model) Paints containing water are not recommended for use with Micro Mask.
2. Brush a smooth coating of Micro Mask on the area to be masked. Brush can be cleaned with water.
3. When dry, Micro Mask may be cut into intricate shapes with a sharp hobby knife. Use care not to cut too deeply into the underlying paint. The areas that you wish to paint should be carefully peeled off.
4. As soon as the paint is dry to the touch, Micro Mask may be removed, either by lifting an edge and peeling it away or by pressing adhesive tape to the Micro Mask masked area and pulling it away carefully, so as not to lift the paint.
For USE ON Waterproof Painted or Plastic Surfaces