Print Scale 72-079 1/72 North American F-86E Sabre Decals

Type: water-slide decals

1. F-86E-1-NA 50-623 ?Pretty Mary? of the 335th FIS / 4th FIW flown by Col. Harrison R. Thyng

2. F-86E-10-NA 51-2738 ?Father Dan? 25th FIS / 51st FIW flown by 2nd Lt. Sam P. Young

3. F-86F-10-NA 51-12958 ?The Paper Tiger? of the 39th FIS / 51st FIW flown by Capt. Harold E. Fischer

4. F-86F-30-NA 52-4584 ?MiG Mad Marine? of the 25th FIS / 51st FIW flown by Maj. John Glenn

5. F-86E-10-NA 51-2822 ?The King? of the 336th FIS / 4th FIW flown by Col. Royal Newman Baker

6. F-86E-10-NA 51-2767 ?The Chopper? of the 336th FIS / 4th FIW flown by Major Felix Asla

7. F-86F-30-NA 52-4427 ?The Old Man? of the 8th FBG flown by Col. Walter Benz, Group C.O

8. F-86F-30-NA 52-4341 ?Mig Poison? of the 67th FBS / 18th FBG flown by Maj. James Hagerstom

9. F-86E-10-NA 51-2834 ?Jolley Roger? of the 335th FIS / 4th FIW flown by Capt. Cliff Jolley

How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.