RB Productions M24001 1/24 Hawker Typhoon Canopy Mask for Airfix kit

This is a set of canopy masks designed for the Airfix 1/24 Hawker Typhoon kit.

Made from masking material specially-designed for use with airbrushes. The material is repositionable and flexible and will conform to complex curves. The material is grey and semi-stransparent, which (unlike paper-based opaque masks) allows the user to see whether there are any air bubbles along the edges.

How-to:
Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all the indentations with a pointed wooden stick.
Painting method: Try not to apply two coats of color at the edges of a mask. Instead, apply one color prior to painting the proper camouflage, and apply the other color after the mask is back on. Otherwise, the coating in the areas encased by the mask may be too thick, and after removing the mask the edges of the lighter color may become visible.