RB Productions

This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 5 cm (approx 2 in). Suitable for all scales and all types of modeling.This tool works on the same principle as the hinged bending brakes that can be found in many metal workshop..

Fine saw blade (24 t/cm - 58 tpi)This is a fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin.This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "..

This is a tool that can be used to cut many long items (such as rods or bars) to the same length. Ideal for cutting stanchions, masts, antennas, duckboards, fence posts, etc. The pre-set dimensions range from 0.5 mm to 30 mm in 0.5 mm increments. The cutting gauge is made of stainless steel...

Contour saw (16 t/cm - 40 tpi)This is a set of medium-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 5 saw blades:* 2 Curved saws - these can be run along a ruler as shown in the second photo above. Two ..

Bucksaw & Fine bladeFine saw blade (24 t/cm - 58 tpi)This saw consists of a saw blade that is tensioned and held from both ends, leaving the blade clear to cut through the material.The set contains two frets of photo-etched stainless steel, one containing the multi-part frame and one containing thre..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

1/72 Scale RulerYou can use this tool to measure scale 1/72 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

1/48 Scale RulerYou can use this tool to measure scale 1/48 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Scale 1/350 Multimedia model kit of the L.E. Roisin (P51) Irish Naval Service OPV The set includes:- Resin parts - Photo-etched parts in bass and stainles..

Scale 1/350 model kit of the LE Eithne, P31, Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals..

Scale 1/350 model kit of the Emer-Class Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals for P21 L.E. Emer, P22 L.E. Aoife, P.23 L.E. Aisling and P62 of the Maltese Navy...

1/35 Scale RulerYou can use this tool to measure scale 1/35 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

This is the harness used on Imperial Japanese Army aircraft in World War 2. Suitable for all Imperial Japanese Army aircraft with the "Ki" prefix used during WW2. No painting needed (except for painting the red quick-release lever). Simply remove the pre-cut straps from the backing paper, glue the ..

This is a complete set of radiators to replace the photo-etched parts provided in the Tamiya 1/32 F4U Corsair kit. The set contains the oil coolers. No modifications needed, these parts are direct replacements for the kit parts.The oil cooler parts are made of stainless steel and provide a finer an..

Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..

Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.The straps can be set to whatever length you need, just as on the real thing.The set includes one sheet of photo etched parts with the buckles and cla..

- Very easy to use. No painting needed, just remove the pre-cut belts from the backing paper, thread them though the buckles and fit them to your model.- The straps can be set to whatever length you need, just as on the real thing.- The set in..

Scale 1/32. This is the standard seat harness used on all British-made / RAF aircraft until the end of WW2 and even after. Suitable for all wartime Spitfires/Seafires, Hurricanes, Mosquitoes, Typhoons, Tempests, etc.No painting needed, just remove the pre-cut belts from the backing paper, glue the d..

Scale 1/32. "Sutton A" Seat Harness. Designed by Oliver Sutton in 1917, this was the "Jack-of-all-trades" harness used on all British-made / RAF aircraft from 1918 until the beginning of WW2 (and even after). Suitable for all interwar British aircraft, especially biplanes. These harnesses saw acti..

1/32 Scale RulerYou can use this tool to measure scale 1/32 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

This is a set of turnbuckles for rigging biplane models in scale 1/32. These are suitable for WW1 German and French aircraft as well as some British aircraft fitted with round cables (rather than the late-war airfoil wires). The package contains 80 rigging turnbuckles in photo-etched brass. By foldi..

This is a very large A4 (printer-sheet size) photo-etched brass base used to simulate the PSP planks used on airfields. Suitable for scale 1/32...

Suitable for display bases.Perforated Steel Planking (or Marsden Matting) was extensively used by the United States in rapid building of landing strips / aircraft pens. These were used in all theatres of operations, not only in World War 2, but also in Korea and Vietnam. These are still in use in so..