Hobby & Model Paints

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacque..

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any e..

These enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Three colours set are used to make effects of dry, fresh and wet mud. You only need to mix it with plaster and apply it with a paintbrush or an airbrush.This colour set contains:1. AK-016 Fresh Mud2. AK-017 Earth Effects3. AK-023 Dark Mud..

UsageA solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour)SubstrateA wide range of surfaces including most plastics, wood, glass, ceram..

..

Usage:A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).Substrate:A wide range of surfaces including most plastics, wood, glass, ce..

Usage:A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).Substrate:A wide range of surfaces including most plastics, wood, glass, ce..

Contents:AK-069 Streaking grime for GreyAK-070 Wash for Panzer GreyAK-071 Blue Filter for Pz. GreyThis set are designed for all those modellers who love early German vehicles, or to put it another way, all those painted in Panzer Grey. The set includes all the basic products you need to do a near to..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

UsageA solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour)SubstrateA wide range of surfaces including most plastics, wood, glass, ceram..

Enamel type product to create Streaking effect.Create realistic dirt streaks and grime effects easily with this dirty grey colour. Apply lines from the upper part of plate and then fade with a clean brush moist with Enamel Thinner...

Enamel type product to create Streaking effect.Grimy grey coloured effect ideally suited for creating streaks of dirt over sand and light coloured surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Apply lines from the upper part of plate and then fade ..

..

Enamel type product to create Streaking effect.Darkest colour in the range specifically suited for streaking effects over dark coloured vehicles and surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Apply lines from the upper part of plate and then fad..

Dark Gray is set to join the fie existing products in the Panel Line Accent Colour selection! This enamel paint is ideal for highlighting panel lines and other details to give your model a more realistic depth. It has been prediluted to the ideal consistency for easy application. Dark Gray is perfec..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Usage:A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).Substrate:A wide range of surfaces including most plastics, wood, glass, ce..

Usage:A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).Substrate:A wide range of surfaces including most plastics, wood, glass, ce..

UsageA solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour)SubstrateA wide range of surfaces including most plastics, wood, glass, ceram..

Usage:A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour).Substrate:A wide range of surfaces including most plastics, wood, glass, ce..

Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively ..