Military Vehicles & Tanks

Driver's retracted diver's canopy to cover crew from the weather, often seen in the pictures.For French Armored Car Modele 1914 kit number 35013PE frame is not included, use the one provided with the Photo Etch set A35-0073d printed parts..

Driver's fabric canopy to cover crew from the weather, often seen in the pictures. 3d printed parts..

Puncture-proof Ducasble tyres for French Armored Car Modele 1914 kit number 35013Seen on several armoured car model 1914 old photos. were fitted on the front wheels (but it is not a rule) and on the rear inner wheels3d printed parts4 wheels in a set..

Photo etched set for French Armored Car Modele 1914 (Type ED)..

3d printed parts..

Fahrpanzer Gruson shells3d printed parts..

Fahrpanzer exterior set.- hollow chains-Gruson factory label x2-Stopping brackets3d printed parts..

3d printed parts..

3d printed parts..

Fahrpanzer ammunition box-8 fully loaded racks-1 empty rack-1 open semi-full shells rack3d printed parts..

Ehrhardt stockwinde (jack). 2 per set.It may be Ehrhardt was equipped with 2 stockwinde, there are almost no images showing the same car from both sides, only one series showing Ehrhardts in Italy. Also "Griep-to" had at least one stockwinde installed at the back of the car...

Photo etched set for Ehrhardt 1917 Armoured Car..

Grousers for Ehrhardt3d printed parts..

An MG08 with cradle (one MG in the set) mount for 35010 Ehrhardt armoured car.3d printed parts..

Ehrhardt louvers for 35010 Ehrhardt armoured car3d printed parts..

Two sets of PE chains for Lanchester's rear wheels..

3d printed parts..

3d printed parts..

3d printed parts..

Accessory designed for plastic scale models of military vehicles. Seat belts from HGW Models are laser-cut so it is easy-to-use product. Set contains micro fabric belts for kits in 1/35 scale.Accessory features: contains micro-fabric highly detailed parts designed for plastic models of military v..

This set includes five (5) high quality resin wheels (4 wheels + 1 spare wheel) for Kubelwagen with Off-road tread pattern 2 model kit in 1/35 scale. The set also contains separate bolt for the spare wheel in order to keep the overall detail at highest possible level. What is also inside is an origi..

The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations. Carry out the test (not on the model), if you are applying to paint made by a different manufacturer. We recommend to spray the surface with a glossy varnish in order to achieve a perfect result. No matter whethe..

The front grill and side engine heat extracter of GMC cckw-353 trucks, which were widely used from World War II to the 1950s, have been perfectly reproduced by ARTO with 3D. The distinctive front grill of the GMC truck, which was welded by mixing thin plates and thin lines, was simply impossible to..

Water-slide Decals: Instruction: 1.Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them. 2.Cut out the decal you need (do it on cutting mat) 3.Grab the decal ..