Military Vehicles & Tanks

Kit cat.no. QWX-16005The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16007The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

Kit cat.no. QWX-16001The set consist:2x 3D-Printed Resin 1/16 wheels 1x 3D-Printed Resin 1/16 spare wheel 1x 3D-Printed Resin 1/16 spare rim 2x sets of wheel caps (2 types) 1x QuickWheel painting maskWHEELS ARE UNPAINTED..

..

Mounted on single strapped frame (x 6 pcs)3D printed resin. Comes on printing supports which need to remove..

3D printed resin. Comes on printing supports which need to remove..

*Note: The set does NOT include any armour kit...

..

Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Comes on printing supports which need to remove #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

3D printed resin. Comes on printing supports which need to remove..

3D printed resin. Comes on printing supports which need to remove..

The MX-6707/VRC Antenna mast base was part of the AS-1729 Vehicular Antenna, generally mounting a VHF antenna. The antenna base was commonly known as part of the VIC1 vehicle harness in Australian service. These antenna-based were used on numerous Australian and Western vehicles. The Australian vehi..

x5 Australian Modern-era 25mm ammunition boxes. Can be used for ASLAV-25 Type 1. Can be used as extra stowage as seen on a variety of vehicles in the modern era...

..

..

#NOTE: The set does NOT include a model kit...

Note: This set does NOT include any armour kit.It contains resin and photo-etched parts...

Note: This set does NOT include any armour kit.It contains resin and photo-etched parts...

Australian M113s were fitted with Front and Rear indicator lights. This modification occurred from around the early 1970's onwards, till they were replaced by another style of indictor lights in the late 1990's. Check your references before fitting.This upgrade set is a direct replacement for AF..

..

..

..

(IR box ) from September '44 - for Trumpeter kit..

Set contains 3D printed + resin parts. Supports have to be removed..