Military Vehicles & Tanks

Fahrpanzer ammunition box-8 fully loaded racks-1 empty rack-1 open semi-full shells rack3d printed parts..

Ehrhardt stockwinde (jack). 2 per set.It may be Ehrhardt was equipped with 2 stockwinde, there are almost no images showing the same car from both sides, only one series showing Ehrhardts in Italy. Also "Griep-to" had at least one stockwinde installed at the back of the car...

Photo etched set for Ehrhardt 1917 Armoured Car..

Grousers for Ehrhardt3d printed parts..

Dismantled grouser rims for Ehrhardt kit number 350103d printed parts..

Early type rear fenders for 35010 Ehrhardt armoured car3d printed partsSome of the Ehrhardts had only this version installed, next batch had different style fenders, the one included with the plastic kit..

An MG08 with cradle (one MG in the set) mount for 35010 Ehrhardt armoured car.3d printed parts..

Ehrhardt louvers for 35010 Ehrhardt armoured car3d printed parts..

Additional tanks for Ehrhardt - 35010 Ehrhardt armoured car.3d printed partsEhrhardts from the 2nd platoon were equipped with these tanks, it is not known if those were additional fuel tanks or water tanks. Later, we found that tanks were installed on both sides of the car...

Two sets of PE chains for Lanchester's rear wheels..

Canadian Armoured MG Carrier resin wheels, 4 resin parts..

Kit cat.no. QWX-061The set consist:12x 3D-Printed Resin 1/35 complete wheels1x QuickWheel painting mask..

The set consist:12x 3D-Printed Resin 1/35 complete wheels1x QuickWheel painting mask..

Kit cat.no. QWX-062The set consist:2x 3D-Printed Resin 1/35 complete wheels 1x QuickWheel painting mask..

Kit cat.no. QWX-064The set consist:4x 3D-Printed Resin 1/35 complete wheels..

Kit cat.no. QWX-063The set consist:4x 3D-Printed Resin 1/35 complete wheels..

Full interior kit w/highly detailed Features- Metal gun barrel - 5 decals & painting - 36*23cm matte poster - Workable track links - Workable torsion bars - 3D printed muzzle brake - Hatches can be open or closed..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with sn..

All parts made with 3D printing technology...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

All parts made with 3D printing technology...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with sn..

All parts made with 3D printing technology...

Features:- The first model of the 2 cm Flak 38 anti-aircraft gun from ICM - Reproduces the geometry and proportional dimensions of the real gun - Can be assembled with two barrel elevation angles, with or without protective shields - Four color scheme options representing different periods of World ..