Model Motorcycles

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - clutch with visible discs, - clutch basket...

Kit contains: - chain (placed on the stiff base), - front and rear sprockets (printed as separate parts), - rear sprocket screws (spare parts included), - front sprocket nut, - nuts for the rear wheel axle with wire for making the locking cotter, - chain tensioners with tensioning bolts...

Kit contains: - chain with sprockets (precut and ready for painting), - a set of bolts with nuts for the rear sprocket, - nut on the front sprocket, - nuts for the rear wheel axle with wire for making the cotter pin, - chain tensioners with tensioning bolts (their installation requires modification ..

Short springs with shock absorber reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring, the rubber that protects it, and t..

Short springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so..

Set of 40 electrical angular connector (4 types) plus 10 straight connectors and 2 types regulators and 2 types of ECU units which will raise level of detail of your model on the next level. Each part has predrilled holes making this kit easy to use. Kit also include wires in 8 colors (approx. 13 cm..

Set dedicated to upgrade brakes in 1/12 scale motorcycles. Kit contains: bleeding screws in two sizes (15 of each type), brake caliper screws (three types: external torx, internal torx, allen key; each type in two sizes, 20 of each size), T shape screws in two sizes for carbon ceramic rotors along w..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket nut (printed on sprocket), - moveable steering dumper (which can be created in two versions: as fully 3Dprinted or as combination of printed elements and metal rod which can be found in the kit), - metal rod for s..

Windshield and anti-slip knee anchor pads for the gas tank.Family: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC001 Item: Honda RC213V To be used with: Tamiya reference TAM14130..

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts (printed on sprocket)...

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC017 Item: Honda CBR1000RR-R Fireblade SP Includes: vacuum formed parts To be used with: Tamiya references TAM14138 and TAM14141..

Chain set 1/12 scale - Honda CBR1000RR-R Fireblade SP - 3D printed parts - for Tamiya references TAM14138 and TAM14141Kit contains: - chain (placed on the stiff base), - front and rear sprockets (printed as separate parts), - front and rear sprockets screws (spare parts included)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Improvement set for the Tamiya Ducati Superleggera V4 to replace the exhaust system with the titanium competition exhaust kit, as well as the lower casing that covers them and the necessary parts to remove the mirrors and the license plate. The exhausts include the springs, the lambda probe, the det..

Kit contains: - clutch with visible discs, - clutch basket, - external cover...

Set of parts for replacing the chain assembly of the Tamiya Ducati Superleggera V4 in 1/12 scale. It includes all the different elements that make up the whole chain assembly (including both front and rear sprockets and all their accessory elements), and everything is designed in separate parts whic..

Kit contains: - chain with sprockets (precut and ready for painting), - set of 2 muffler meshes...

Improvement set for the Tamiya Ducati Superleggera V4 that includes honeycomb grilles for the exhaust, different types of screws to replace the metal ones supplied by Tamiya, the dry clutch with open cover for competition, divided into different pieces to facilitate work of paint, the brake lever gu..

Kit contains: - chain (placed on the stiff base), - front and rear sprockets (printed as separate parts), - rear sprocket screws (spare parts included), - rear sprocket mounting plate, - mounting plate for the right side of the rear wheel, - central nuts for the sprocket and wheel sides (spare one i..

Kit contains: - chain with sprockets (precut and ready for painting), - rear sprocket mounting plate, - rear sprocket screws (spare parts included), - central nut...

Chain set 1/12 scale - Ducati 900 Mike Hailwood Replica / Ducati 900 SS - 3D printed parts - for Tamiya references TAM14019 and TAM14025 - 1 + 2 unitsKit contains: - chain with sprockets (precut and ready for painting), - front and rear sprocket screws (printed on sprockets), - set of 2 meshes for c..

Chain set 1/12 scale - Ducati 1199 Panigale S - 3D printed parts and other materials - for Tamiya references TAM14129 and TAM14132Kit contains: - chain (placed on the stiff base), - front and rear sprockets (printed as separate parts), - rear sprocket screws (spare parts included), - rear sprocket m..

Chain set 1/12 scale - Ducati 1199 Panigale S - 3D printed parts - for Tamiya references TAM14129 and TAM14132 - 1 unitsKit contains: - chain with sprockets (precut and ready for painting), - rear sprocket mounting plate, - rear sprocket screws (spare parts included), - central nuts for the sprocket..