Model Planes

This set includes six (6) wing pylons, two (2) centerline pylons*, seven (7) BRU-36 ejector racks and two (2) adapters used when the LAU-7 missile launcher is attached to the outboard pylons.*Different centerline pylons are configured for use with the strakes or gun pack.3D printed and designed..

This set contains two accurate fuel tanks for the AV-8B Harrier and Harrier GR.5/7/9Each tank comprises 5 parts with keys to correctly place both the fore and aft sections.Designed by Richard VanZandt of Flight Line Resin..

3D ResinThis set includes eight (8) AOA Probes. Can be used on the F/A-18A-D, AV-8B, A-6E, EA-6B and several others...

3D ResinDesigned by Richard VanZandt, this set includes one (1) pod, comprised of three parts. Main body, alignment plug, and the tail section. Assembly required after minimal cleanup of parts...

This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.While limited in its use, the pod is still carried today by the US Marine Corps and is also used by ..

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the stowed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the stowed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4B/N/J Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with pylon adapters for the F-4C/D/E Phantom.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end of launche..

The AERO-3B missile launcher was designed to be used with the AIM-9A/B/C Sidewinder missiles.This set includes 4 launchers with fuselage mounting adapters for the F-8E/J Crusader.Each launcher is 3D printed and require only a light sanding to remove any remnant of the support nib at the aft end..

3D ResinThis set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station...

3D ResinThis set includes four (4) ADU-830/A Adapters currently being used by the AV-8B II Plus to allow the carriage of AIM-120 with LAU-127 on stations 2 and/or 6, as well as AIM-9 with LAU-7 on those two stations...

3D ResinThis set includes four (4) ADU-299 Adapters. These are used to allow aircraft to carry the LAU-7 missile launcher on stations not normally designed to carry that launcher...

3D ResinThis set includes three (3) ADM-141 TALD.The TALD was used with great success on SEAD missions in the opening stages of Operation Desert Storm in 1991. More than 100 were launched on the opening night of the war. This prompted the Iraqi air defense to activate many of its radars most of w..

This set contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D.These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782.This set of pylons corrects the inaccurately shaped pylons included in the Academy k..

Hispano 20mm cannon bays for Airfix Spitfire kits (1970 tooling). Cannon bay and ammunition bay covers are included...

Hispano 20mm cannon bays for Airfix Spitfire kits (1970 tooling). Cannon bay and ammunition bay covers are included...

Browning gun bays for Airfix 1/24 scale Spitfire kits (1970 tooling)...

Browning gun bays for Airfix 1/24 scale Spitfire kits (1970 tooling)...

3D printed exhaust stacks recommended for Wasp kit...

..

British WWII rocket projectiles including launched pod set...