Model Planes

3D ResinThis set includes twelve (12) BDU-33 25lb practice bombs...

This set includes eight (8) wing pylons, one (1) centerline pylon, seven (7) BRU-36 ejector racks, and two (2) LAU-138 BOL launchers.3D printed and designed by Richard VanZandt using photos and measurements provided by FLD, Simon Oakes, Robert Foster and David Sweetman..

This set includes 6 buckets that can be used to replace those found in kits that may be under detailed...

This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts...

3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

3D ResinThis set contains one (1) Left Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, AV-8B and EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..

This set includes two (2) AGM-123 Skipper anti-ship laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the ..

This set includes two (2) thermally protected AGM-123 Skipper anti-ship laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes ..

This set contains two (2) fuel tanks with print supports attached. Use a fine tip sprue cutter to remove supports from the tank. Do not 'break' the supports free, as this can damage the surface of the tank. We have intentionally provided a photo of the tank with the supports removed in this fashion,..

3D ResinThis set includes two (2) AERO-1D 300 gallon fuel tanks with the four fin tail. Each tank is made up of four parts. Some light sanding will be needed to remove the small nibs from the print supports.Like most of our items, parts are removed from the print supports prior to curing and packa..

3D ResinThis set includes two (2) AERO-1D 300 gallon fuel tanks with the finless tail. Each tank is made up of two parts. Some light sanding will be needed to remove the small nibs from the print supports.Like most of our items, parts are removed from the print supports prior to curing and packagi..

This set includes two (2) XM158A1 Rocket Launchers.The Launcher was a seven-tube, reloadable, reusable, repairable 2.75" rocket launcher M158A1 was a variant of the M158 that included a modified hardback mount..

3D ResinThis set includes six (6) highly detailed and accurate IFR probe tips for use on all US and NATO aircraft that use the hose and drogue system...

3D ResinThis set includes six (6) cluster bombs and come as shown in the photo.CAD by P. Haupt..

3D ResinDesigned by Jarrad Bradley, this set includes four (4) Paveway IV warheads with guidance sections, four (4) Tail Sections, eight (8) seeker heads (four with covers), and sixteen (16) fins.Used on the UK Harrier II, Tornado, Typhoon, and F-35..

While we have an extensive line of ordnance, we also understand that some modelers are perfectly content using the bombs provided in the kits. In some cases, the fuzes included with them leave a lot to be desired and may not be what you'd like to depict.This set provides 24 MXU-735 Solid Nose Plu..

This set includes two (2) Thermally Protected Mk-84 2000lb bombs with two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-84 was used extensively by the USMC during Operation Desert Storm...

This set includes two (2) Mk-84 2000lb bombs with two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-84 was used extensively by the USMC during Operation Desert Storm...

This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. Yours truly bu..

This set includes two (2) Mk-83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. Yours truly bui..

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensivel..

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively..

This set contains six (6) thermally protected Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following :M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the forward end of the tail section and ..

3D ResinThis set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs.This Tail Fin is primarily used by the USAFIt will be necessary to lightly sand the aft section of the bomb body, as well as th..