Model Planes

..

The SAC set replaces the primary load bearing parts ... it does not replace every part of the kit landing gear.**NOTE:Slight warpage might occurred to the malleable nature of white metal and is easily straightened. A brief but succinct tutorial for working with white metal can be found on the homepa..

..

..

**NOTE:Slight warpage might occurred to the malleable nature of white metal and is easily straightened. A brief but succinct tutorial for working with white metal can be found on the homepage the their official website: www.scaleaircraftconversions.com..

..

..

..

Note: For strength and convenience, the main gear struts have been cast as single parts rather than 3 separate parts per leg. The right gear should be installed in Step 88B while the left should be installed in Step 89B.**NOTE:Slight warpage might occurred to the malleable nature of white metal and ..

**NOTE:Slight warpage might occurred to the malleable nature of white metal and is easily straightened. A brief but succinct tutorial for working with white metal can be found on the homepage the their official website: www.scaleaircraftconversions.com..

3D-Printed & Coloured Interior on Decal Paper..

This is an airframe update set for Kitty Hawk's FJ-2 Fury. It includes a new intake nose ring with a corrected shape (the kit's nose is much too blunt) and cast-on one-piece air intake front part. There is detail scribing on the inside of the nose ring (absent on the kit parts). The nose wheel well ..

F-4 Phantom C/L pylon, 1:48, for the Zoukei Mura line of kits. The pylon fit on and into the detail moulded onto the ZM lower wing surface. It comes with two sets of separate pins - one for the larger stabiliser pins and the smaller sway brace pins that connect to the stores to be mounted...

F-4 Phantom C/L pylon, 1:48, for the Tamiya line of kits. The pylon fits on and into the moulded-on mounting tab between the Aux doors on Tamiya's kit with a simple modification (it needs to be shortened and slightly re-shaped). The pylon set comes with two sets of separate pins - one for the larger..

Set contains four resin engine cowlings for kit DC-6 / C-118 from Heller kit...

3 brass parts 2 resin parts rod..

..

The de Havilland DH.82 Tiger Moth is a 1930's British biplane designed by Geoffrey de Havilland and built by the Company of the same name. It was operated by the RAF as a primary trainer aircraft. In addition to its principal role as a trainer, the Second World War saw RAF Tiger Moths operating in o..

The Spitfire XIV was intended to provide high altitude air superiority, to complement the medium-altitude Tempest V. Powered by the more powerful Griffon Engine, the Spitfire XIV emerged as the most successful of all Spitfire types in destroying the "buzz bombs.". It arrive in Europe jus in time to ..

Wing Commander Ian "Widge" Gleed, leader of No. 244Delivered to the RAF in January 1942, AB502 was shipped to Takoradi where it was fitted with the smaller 'Aboukir' filter before being delivered to 244 Wing.It became Wg Cdr Gleed's personal 'mount' in March 1943. Gleed used this aircraft, marke..

..

This mask has specifically been designed for the Mk XIVe.In total, 957 Mk XIVs were built, of which over 430 were FR Mk XIVs. After the war, second hand Mk XIVs were exported to a number of foreign air forces; 132 went to the Royal Belgian Air Force, 70 went to the Royal Indian Air Force and 30 of..