Model Planes
Brand: Advanced Modeling
SKU: AMC 48227
Set includes detailed resin parts.Suitable for Soviet Russian scale aircraft model kits MiG-27K, MiG-27M, MiG-27D, Su-25, Su-24M, Su-17M2, Su-17M3, Su-17M4,Su-17UM3 model kits in 1/48 scale...
US$11.67
51 % OFF
US$5.65
Pre-Order
Pre-Order
Brand: Eduard
SKU: ED 3DL48234
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$7.77
20 % OFF
US$6.20
Pre-Order
Pre-Order
Pre-Order
Brand: Eduard
SKU: ED 3DL48233
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$19.47
22 % OFF
US$15.07
Pre-Order
Brand: Eduard
SKU: ED EX1129
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$17.52
22 % OFF
US$13.56
Brand: CMK
SKU: CMK-4212
Contains new control surfaces (rudder, elevators with separate stabilizers and ailerons)...
US$7.12
22 % OFF
US$5.50
-69 %
Brand: Maestro
SKU: MMRBD7202
A set of Alps-printed decals with "FC" codes in three styles: 1935 model, 1964 model and modern. One sheet each of yellow and black letters. 1/72 scale. How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer..
US$5.82
US$1.76
-70 %
Brand: Maestro
SKU: MMRBD4802
A set of Alps-printed decals with "FC" codes in three styles: 1935 model, 1964 model and modern. One sheet each of yellow and black letters.Solid decal film. NOTE! The yellow letters have a slight striped appearance on distances less than 12 inches. This is because the right yellow hue does not exis..
US$7.77
US$2.30
-69 %
Brand: Maestro
SKU: MMRBD4801
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$5.17
US$1.60
Pre-Order
Pre-Order
Pre-Order
Pre-Order
Brand: Eduard
SKU: ED 644315
Brassin pre-painted dashboard and STEEL seat belts for Fi 156C in 1/48 scale.
Easy to assemble, replaces plastic parts.
Recommended kit: Tamiya
Set contains:
- resin: 1 part
- decals: no
- photo-etched details: yes, pre-painted
- painting mask: no..
US$13.62
22 % OFF
US$10.61
Pre-Order
Pre-Order
Brand: Eduard
SKU: ED 3DL48235
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$20.77
21 % OFF
US$16.25
Pre-Order
Pre-Order
Brand: Eduard
SKU: ED EX1127
Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..
US$17.52
22 % OFF
US$13.56
Pre-Order
Brand: DN Models
SKU: DN-48-827-168
The set includes one sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is flex..
US$23.37
17 % OFF
US$19.20
-72 %
Brand: Maestro
SKU: MMRBD4803
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$5.82
US$1.60
Pre-Order
Pre-Order
Pre-Order