Model Planes

Excellent quality, the best technological production of the foil cross-section, mask with printed part numbers together with the instructions clearly defines the parts of the mask and their specific location and application...

Excellent quality, the best technological production of the foil cross-section, mask with printed part numbers together with the instructions clearly defines the parts of the mask and their specific location and application...

Excellent quality, the best technological production of the foil cross-section, mask with printed part numbers together with the instructions clearly defines the parts of the mask and their specific location and application...

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

Brassin collection of all four engines for B-17G in 1/32 scale.contains these sets:ED632027 B-17G engine No. 1ED632028 B-17G engine No. 2ED632029 B-17G engine No. 3ED632030 B-17G engine No. 4..

1/32 Douglas A-20G Havoc double-sided express mask for kit. Catalog no. 200-M32062. Excellent quality, the best technological production of the foil cross-section, mask with printed part numbers together with the instructions clearly defines the parts of the mask and their specific location and appl..

Contents Ammo box: 4 pieces Ammo: 5 piecesThe items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent...

Suggested kit: F-22A Raptor kits in 72nd scaleRe-usable die-cut paint masksThe set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too..

The masks are re-usable.The set includes one sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over a..

P-38F/G Lightning Canopy, Lights & Wheels Paint Mask Set 1/48Suggested scale: 1/48Suggested kit: Tamiya #61120Re-usable die-cut mask set - Exterior and Interior includedThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is ..

The masks are re-usable.The set includes one sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over a..

Suggested kit: F-4E Phantom II & F-4G Wild Weasel kits from Zoukei-Mura, MENG, HasegawaRe-usable die-cut paint masksThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The t..

Camouflage Paint Masks for F-16C BDU Green Splinter Aggressor 1/48Suggested scale: 1/48Suggested kit: TamiyaRe-usable die-cut camo mask setThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn'..

The camo scheme is based on photos of F-16C AF 86 -263 and AF 86 314 ?C 18th Aggressor Squadron based at Eielson Air Force Base in Alaska.Both F-16 are doable with what??s included in the set.Re-usable die-cut camo mask setThe set includes two sheets of pre-cut masks (shown in the picture). The mask..

Suggested kit: Douglas Skyraider kits in 48th scaleRe-usable die-cut paint masksThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted..

Suggested scale: 1/48Suggested use: Chengdu J-20 kits in quarter scaleRe-usable die-cut camo mask setThe set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear ..

Set includes Russian/Soviet Stars StencilsThe set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, the..

The set includes Insignia and Canopy masks.The set includes one sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they..

Re-usable die-cut mask setThe set includes 3 sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be us..

Re-usable die-cut masksThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be use..

B-24D Liberator "The Little Gramper" Assembly Ship Camo and Insignia Paint Mask Set 1/32Suggested scale: 1/32Suggested kit: Hobby Boss B-24 Liberator #83212The set includes five sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peele..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..