Model Planes

This detailed open engine compartment set has been designed to fit the new 1/72 Special Hobby P-40N kit. The set contains also the cowling panels...

This seat is intended to be used with the new Special Hobby P-40 kits of the E, K, M and N-1 verisons or the earlier released P-40 F,L kits and will no doubt fit other P-40 models too. The master part of the seat was 3D designed and printed for the best levels of detail. The US type seat belts are c..

This set with a nicely detailed Allison V-1710-39 engine resin replica is designed to fit the new Special Hobby P-40 E and K models. Contains also the engine cover panels...

The set contains all new wheels with cross tread tyres, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts...

The new Special Hobby P-40 Warhawk kits will benefit from the addition of this set which offers the modeller new and nicely detailed cockpit sidewalls and a new control stick. The cast part replace directly and easily the original styrene items. Not much surgery needed. The master parts were 3D desi..

Special Hobby are going to release a completely new series of the American WW2 P-40 Warhawk/Kittyhawk fighter in 1/72 scale. Hand in hand with these kits, several new resin sets will also become available. Set no.7386 depicts the flying control surfaces which the modeller will be able to portray in ..

The Full resin kit of a two-seater prototype of a French fighter with variable-sweep wing built in 1970s. The kit contains vacu-formed canopy, strengthened undercarriage legs and decals...

Nicely detailed resin ejection seats for reconnaissance and ground-attack versions of the Mirage F.1 model now produced by Special Hobby. The set comes with photo-etched seat harness and other smaller parts...

Admirably detailed resin ejection seats made to improve the new Special Hobby Mirage F.1 model. A fret with PE-parts offers the seat harness and other tiny parts...

Nicely detailed pair of hot seats tailored to fit your Mirage F.1B (two-seater) model produced by Special Hobby. The set brings also a PE-fret with seat belts and some other tiny details...

Meticulously detailed nose and main undercarriage wheels for a French post-war fighter aircraft. Intended in the first place for the new Special Hobby model, can be used for different models as well. Designed using 3D technology...

Nicely detailed Cyrano IV radar resin set (made using 3D technology) with its pressurised casing removed, tailored for the new Special Hobby Mirage F.1 kit and showing to good advantage a detailed rendition of the flexible radar scanner dish (or the ''antenna'') usually hidden under this casing. It ..

Nicely detailed resin parts for the Cyrano IV radar (made using 3D technology) with its pressurised casing on, this set is meant to enhance your new Special Hobby Mirage F.1 kit.It will be very easy to use this set as its resin parts come as direct replacement of the kit's nose plastic parts...

Detailed cast resin parts showing the last stage of the engine turbine, afterburner unit duct and the engine nozzle for the new Special Hobby Mirage F.1 model. A PE-fret comes also with this set. The resin parts replace simply the plastic ones making the assembly quite uncomplicated...

The kit brings two frames of plastic parts, two resin fuselage halves specific to the Re.2003 version and several other resin parts as the interior, engine and some others. Furthermore, there are also photo -etched parts bringing extra detail to the model, vacuum-formed canopy and a decal sheet cove..

The set brings you a nicely elaborated MB Mk.9 hot seat along with its seat belts for a model of a British multipurpose aircraft...

The Matra 155 pod for eighteen 68mm unguided rockets have been used with large number of military aircraft, both fixed-wing and helicopters, mainly of British, French or Israeli origin in service with many armies of the world. The Matra pods were carried under different types such as were for exampl..

The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot's seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the ma..

This set contains all new cockpit parts for a model of arguably the best Japanese WW2 fighter plane. The detailed resin parts include a new cockpit floor, side consoles, pilot's seat, cockpit bulkheads, control column, rudder pedals and instrument panel. The set also offers a piece of acetate film w..

Detailed resin cockpit (with a floor, control column, pilot's seat with belts and an instrument panel) for the Special Hobby's model of the iconic Japanese Army Air Force WW2 fighter aeroplane. The instrument faces are pre-printed on a piece of clear film...

This set consists of the ailerons, tailplanes, elevators and the rudder and has been designed for the Special Hobby's model of the IJAAF WW2 fighter plane...

This set contains a resin pilot's seat with belts which easily replaces the original kit's part and offer higher levels of detail. Designed to fit Hasegawa's 1/72 Mitsubishi J2M3 Raiden (Jack) model..

..

Cast resin model of British experimental tailless aircraft developed during WW2. The HP. 75 Manx was built to evaluate flight characteristics for much larger tailless aircraft to be used as a military bomber. The plane flew with two types of engine cowlings and undercarriage legs. The model contains..