All Products
Brand: Flying Leathernecks
SKU: FL48-8107
3D ResinThis set includes three (3) pieces that make up the belly strap found on late F-4E and all F-4G Phantoms. Designed to be used on the Meng kits, it may work with other kits with some adjustments.The strap was also found on the F-4S and the F-4J's operated by the UK.Parts come as shown a..
US$10.13
Brand: Flying Leathernecks
SKU: FLM48-50
This is a pre-cut vinyl mask set designed to be used with the new Tamiya F-4B. While the kit does include masks, they are on one continuous sheet. Our set is a good time saver and will help avoid mistakes while cutting around the printed lines on the kit set...
US$6.44
Brand: Flying Leathernecks
SKU: FL48017
*** NOTE *** This sheet does NOT include the mask for the bat!Waterslide Decals printed by Microscale (Insert printed by Cartograf).5.5 x 8.5 inch sheet..
US$18.10
Brand: Flying Leathernecks
SKU: FLV48001
Redesigned set includes the plates added to the upper wing and forward nose section. Parts adjusted to accurately fit all 1/48 F-16 kits...
US$6.44
Brand: Flying Leathernecks
SKU: FL48-8070
This set includes two (2) main and two (2) nose wheels for Kinetic's 1/48 EA-6B, E-2C and C-2A kits.Due to variations in the printing process, as well as very slight differences in the kits landing gear, it may be necessary to enlarge the mounting holes on each wheel using a small drill bit.Whee..
US$10.13
Brand: Flying Leathernecks
SKU: FL48015
Waterslide Decals printed by Microscale (Insert printed by Cartograf). 5.5 x 8.5 inch sheet..
US$18.10
Brand: Flying Leathernecks
SKU: FL48-8101
This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene.Parts come as shown in photo. Very light sanding needed on one surface needed prior to painting...
US$7.67
Brand: Flying Leathernecks
SKU: FLM48-1
This set includes masks for all cockpit and cabin windows, as well as wheel masks...
US$6.44
Brand: Flying Leathernecks
SKU: FL48-8103
This set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...
US$6.44
Brand: Flying Leathernecks
SKU: FLM48-12
This set includes a holographic vinyl piece for the LITENING pod window and a small decal sheet with stencil data markings for the kits LAU-7 missile launchers.The decal is screen printed by Microscale...
US$6.44
Brand: Flying Leathernecks
SKU: FL48-8111
3D ResinThis set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place.Remove VG's from kit wingApply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the ji..
US$10.13
Brand: Flying Leathernecks
SKU: FL48-8063
This set includes six (6) wing pylons, two (2) centerline pylons*, seven (7) BRU-36 ejector racks and two (2) adapters used when the LAU-7 missile launcher is attached to the outboard pylons.*Different centerline pylons are configured for use with the strakes or gun pack.3D printed and designed..
US$23.90
Brand: Flying Leathernecks
SKU: FL48-8018
*Designed to be a drop in fit for the Hasegawa AV-8B series of kits. Simply paint and place in intake.* Some sanding may be required around the sides to get a proper fit.Master Patterns by Daniel Tompos..
US$7.67
Brand: Flying Leathernecks
SKU: FL48014
Waterslide Decals printed by Microscale (Insert printed by Cartograf). 5.5 x 8.5 inch sheet..
US$18.10
Brand: Flying Leathernecks
SKU: FL48-8001
This item is 3D printed and is ready to install. "Glass" cut in .005 clear styrene also included. Designed to fit the Hasegawa 1/48 AV-8B kits...
US$7.67
Brand: Flying Leathernecks
SKU: FL48-8112
3D ResinThis set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra..
US$10.13
Brand: Flying Leathernecks
SKU: FL48-8062
This set includes two (2) fuel tanks, each made up of three (3) parts. Tanks are hollow with keyed tail sections for port and starboard configurations.Based on the AERO-1D, these tanks feature details unique to those carried by the AV-8B and are the only accurate tanks for the Harrier available. ..
US$14.70
Brand: Flying Leathernecks
SKU: FL48-8129
3D ResinDesigned by Richard VanZandt, this set includes one (1) pod, comprised of three parts. Main body, alignment plug, and the tail section. Assembly required after minimal cleanup of parts...
US$10.13
Brand: Flying Leathernecks
SKU: FL48-8075
This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.CAD by Craig Sargent..
US$10.13
Brand: Flying Leathernecks
SKU: FL48-8008
AN/ALQ-144, ready to paint and attach to your model.For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10..
US$7.67