All Products

Hollowed, thin-walled resin part to detail the open-ended Jet Fuel Starter (JFS) exhaust tubing as found on modern Eagles, such as the F-15C and F-15E Strike Eagle. A small part that adds detail and interest to this area and brings it up to date on all 1:48 F-15 kits...

..

This is a set of two SR-1 seats for the new Revell 1:48 SR-71. The seats are very accurate in dimension and detail and have been fully CAD designed. The two seats in the set are not identical in the draping/positioning of the belts and hoses. One modification to a detail on the seat was made to adap..

The set includes turned brass barrels.It is very simple to use in Your model and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives.Other P-38 master sets which can be sepa..

This is a conversion set for building an F-104B or early F-104D with downward firing C-1 ejection seats. As a base kit a Kinetic F-104D or TF-104G is needed. This conversion contains three new clear canopy parts (machine cast from transparent, UV stable resin), two C-1 seats plus ejection rails, a n..

This is a backdate set for Kinetic's F-104A/C kit to build an early F-104A with the downward firing C-1 ejection seat. The set includes parts from the F-104A Late set (lower fuselage insert, alternate hot air exhaust panel, L-brackets) plus the C-1 seat, ejection rails, rear cockpit bulkhead, forwar..

..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin...

This is an extensive and complete conversion set to build JF-104A #961, the reaction control systems training aircraft, from the Kinetic F-104A/C Starfighter kit.The set contains:- wing tip pods and nose cone with RCS thrusters, a brass pitot boom (made by Master) with printed vanes all required..

..

..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

The set includes turned aluminum barrels and etched rings.It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives...

..

The set includes turned brass barrels.It is very simple to use in your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives...

The set includes turned brass barrels.It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives...

The set includes turned brass barrels and blast tubes.It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives.Mounting Position: (See..

The set includes turned brass barrels with drilled cooling jackets and blast tubes.Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives.Product Features:- Drill proper holes for 0.50 cal browning diameter..

This is a replacement resin fin tip for the HobbyBoss Intruder family. The HB fin tip has the wrong shape and once you have noticed the error you can't ignore it any longer...the surface detail is slightly corrected and enhanced as well. The required cut on the kit is fairly simple as it's along a p..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin...