All Products
Brand: RB Models
SKU: RB MS10
The set contains turned parts such as masts, spars, boom, bowsprit, etc (depends on model).All elements are produced in scale with proper dimension and profile.Usage of hard wood provide high quality and good surface finish.Wood is unpainted...
US$2.93
Pre-Order
Brand: Falcon
SKU: FSM P007
Detail up set 1/9 scale - BMW HP4 Race - 3D printed parts, metal parts, other materials and assembly instructions - for Meng Model references MT-004 and MT-004sKit contains:
- chain (placed on the stiff base),
- front and rear sprockets (printed as separate parts),
- rear sprocket screws (spare part..
US$22.43
Brand: Resin Improvement
SKU: RESIM-CM72030
Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all ..
US$2.34
Pre-Order
Pre-Order
Pre-Order
Pre-Order
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72203
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Pre-Order
Brand: Royal Models
SKU: RM982
The item that we offer is printed in 3D with high quality resin. The use of this material has enabled us to achieve high levels of detail without compromising the quality of the product. We believe that this product, the result of careful historical and anatomical research, although only an accessor..
US$5.61
Pre-Order
Brand: Archer Transfers
SKU: AR72045R
Type: dry transfersSheet contains over one hundred twenty five tactical symbols, all known designs in two sizes. Although most commonly seen in white, red, black, and yellow were used over winter camouflage. Comes with illustrated instructions with explanations.Basic Guide for Using Dry Transfers..
US$3.49
Pre-Order
Brand: Royal Models
SKU: RM974
The item that we offer is printed in 3D with high quality resin. The use of this material has enabled us to achieve high levels of detail without compromising the quality of the product. We believe that this product, the result of careful historical and anatomical research, although only an accessor..
US$5.61
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72189
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$3.84
Discontinued
Brand: Greenstrawberry
SKU: GSY-72008
Full stand resin figure of worm farmer in hazard suit with feeding device...
US$32.21
Pre-Order
Brand: Star Decals
SKU: STAR-72-A1171
War in Ukraine # 23
Russian T-72B3 in Mariupol 2022.
T-72B3 obr. 2012 and obr. 2016...
US$8.24
Pre-Order
Brand: Star Decals
SKU: STAR-72-A1182
War in Angola # 2.
T-54 and T-55 tanks.
MPLA/FAPLA in 1970-80s.
T-54B, T-55, T-55A and T-55AM...
US$7.39
Pre-Order
Brand: Star Decals
SKU: STAR-72-A1181
War in Angola # 1.
T-34-85 tanks.
MPLA/FAPLA in 1970-80s...
US$7.39
