All Products
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72186
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Brand: Red Roo
SKU: RRD7216
How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..
US$2.49
Brand: Eduard
SKU: ED 72598
This item is a photo-etched detail parts set for use with aircraft kits...
US$10.02
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72198
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72198
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72197
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72197
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72196
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72196
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72199
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$8.24
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72199
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72173
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72173
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$18.02
Pre-Order
Brand: Quinta Studio
SKU: Q-QDS-72172
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72172
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$18.02
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72188
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$14.74
Pre-Order
Brand: Quinta Studio
SKU: Q-QD72193
3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- Avoid leaving the decal in water for too long, as this may ca..
US$13.56
Brand: Eduard
SKU: ED CX412
How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..
US$6.47
Brand: Eduard
SKU: ED CX416
Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all ..
US$3.52
Brand: Eduard
SKU: ED CX409
This product contains a die-cut flexible foil for masking a kit or section of a kit during the painting of a scale plastic model. When selecting this set make sure that it is for the kit recommended as these sets are made specifically for that kit.How-to:Preparing the masks: Masks should not be stre..
US$3.76
