All Products

1/350 scale rails specifically designed for Imperial Japanese Navy battleships, carriers and cruisers. These rails are shorter than typical Western navy rails and the main deck stanchions are spaced differently. There are 7 styles of railing included in the set to fit virtually any large warship in ..

..

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include any plastic/resin parts...

50 x eight pointed aerial spreaders as used on HMS Dreadnought and many other vessels of the period. Each point has a tiny hole through which suitable rigging material can be threaded. Dameter approximately 4 mm. A steady hand and good eyesight are an advantage...

Includes: Flight Deck Safety Nets (Port & Starboard), Flight Deck Safety Nets (Stern), Railings (Boat Bay), Railings (Hangar Mezzanine Deck Sides), Railings (Hangar Mezzanine Deck Forward), Railings (Superstructure Vent Platforms), Railings (Midships Superstructure), Railings (Foc'sle), Railings (Mi..

WEM 1/350 scale photo-etched brass detail set for the Trumpeter kit...

Contains: Side rails with Dodgers, Side rails Open, S-10 Class Mast (Right), S-10 Class Mast (Left), Forward Twin 20mm Training Stop, Stern Rail, S-10 Class Mast Yard, Single 20mm (S-10 Class), 3.7cm Breech Mechanism & Seat, Torpedo Tube Doors, 3.7cm Layers' Mechanisms & Seats, Bow Railing (S-10 Cla..

Set contains: Railings, Cordage Reels, Aft Funnel Cap Handrail, FuMo63 Radar Antenna Assembly, Mine Rail Track Base, Inclined Ladders, Paravane Parts, Gun Deck Side Netting, FuMo21 Radar Antenna Assembly, FuMo23/24 Radar Antenna Assembly, FuMb 7 Radar Sensors (Sumatra), Focsle Breakwater Assembly, A..

1/350 scale three-wire rails as used on large German ships in both World War 1 and World War 2. Stanchions are relief-etched for better definition. Research has shown that these rails are different from standard US and Royal navy three-wire rails. Enough main deck railing is provided for a Bismarck-..

#NOTE: The set does NOT include a model kit...

..

Contents 1. Photo Etching : 11 Sheets 2. Turned Brass Parts : 190ea3. Resin Parts : 4ea3. Anchor Chain : 1ea 4.Instruction Manual..

..

Photo Etching 1sheets, Turned Brass Parts 5ea, Resin Parts 3ea, Brass wire 0.15mm, Instruction Manual A4 1sheet..

Photo Etching 2sheets, Turned Brass Parts 10ea, Brass wire 0.15mm, Instruction Manual A4 1sheet..

..

..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin.Experience in removing 3D parts is useful but not essential. Any supports connected to the detail can be cut with side cutters or a slitting disc; the remainder can be broken off with snip..

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...