All Products

3D printed kit..

..

Please note that the tank in photo is just for display but NOT included in this set...

3D printed kit..

Decalcas: Marking / livery 1/12 scale - Yamaha YZR500 sponsored by Dainese #1 - Kenny Roberts (US) - Motorcycle World Championship 1979 - water slide decals manufactured with digital technology -for Tamiya references TAM14001 and TAM14026..

Pre-cut paint mask in repositionable low-adherence paper, which fits over the different parts of the Tamiya model to be protected in order to carry out the correct painting process. With the Decalcas mask it is no longer necessary to spend time cutting the complicated silhouettes of the mask provide..

The model is handcrafted in a small edition by concession of the Laverda Family. The kit includes polyurethane resin parts, photo-etched parts, decals, rubber tires, steel parts, turned aluminum carburetor trumpets and various coloured wiring for the electrical system...

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts, - a set of 2 exhaust pipe tips, in which the mesh has empty spaces (not imprinted as in the base kit)...

Pre-cut paint mask in repositionable, low-adhesion paper, that fits over the transparent parts and bodywork of Meng 1/12 scale kit of the Shelby American Team Ford GT40 Mk II. These masks, of a higher quality than those included in the model, will allow you, in addition to being able to paint the tr..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

..

Water-slide Decals: Instruction: 1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them. 2. Cut out the decal you need (do it on cutting mat) 3. Grab t..

..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Usage A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available.Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, s..

Acrylic colours for all kinds of Fantasy and Wargame figures. The Game colour formulation greatly improves the colours application. The paint spreads very smoothly, is more fluid, opaque and contains a high pigment saturation, chosen for their brightness, maximum stability and resistance to light. c..

..

..

How to apply water-slide decals:1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.2. Cut out the decal you need (do it on cutting mat)3. Grab the decal wit..

Post WW2 use of Shermans in Chile. M4A1E9 Sherman, M50/60 Sherman with 60mm gun, M51 Super Sherman (ex. Israeli).Water-slide Decals: Instruction: 1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to an..

M/50 M/51 Super Sherman / Isherman / M4A3 -HVSS T-80 Type track: 165 links in 1/35 th scale and a wire to obtain the track pivots...

ATOM Acrylic Colors Set for Brush and Airbrush 20 ml - 4 colors.Accurate colors for USAF Federal Standard colors. High-quality paints for aircraft accurately matched to FEDERAL STANDARD references. This 4-color pack includes the grey tones most widely used by USAF jet aircraft. This includes the ..

This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting that can be painted up and a choice of two different printings of the instrument faces: Scale instrument marking..

The items are 3D printed, self-trimming and painting needed. Please take off the parts with knifepoint carefully instead of pulling it. The items can be painted directly, without cleaning with detergent.Video: movable components..