All Products

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts, - a set of 2 exhaust pipe tips, in which the mesh has empty spaces (not imprinted as in the base kit)...

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts (includes spare elements), - a set of 6 meshes covers for carburetors (includes 2 spare elements)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Complete 1/12 scale chain gear drive set that includes 3 rear sprockets with different dimensions (35, 37 and 49 teeth), a 15-tooth front drive sprocket, 156 links, and different nuts and screws to detail the anchoring of the pinion and crown. Whether you are making a scratch motorcycle or want to i..

Pre-cut paint mask in repositionable, low-adhesion paper, that fits over the transparent parts and bodywork of Meng 1/12 scale kit of the Shelby American Team Ford GT40 Mk II. These masks, of a higher quality than those included in the model, will allow you, in addition to being able to paint the tr..

Cable switch for fire extinguishing systems in 1/12 scale. It includes six 3D printed switches and decals with different logos for integrating the switch in your 1/12 scale models with full detail.Family: Detail Scale: 1/12 Reference: DCL-PAR063 Item: Fire Cable T Handle Includes: 3D printed parts..

Set of 50 electrical wiring connector which will raise level of detail of your model on the next level. Kit contains: - 10 connectors of A type - 2 holes on each side (dim. 1 x 1.7 x 3 mm) - 10 connectors of B type - 4 holes on each side (dim. 1.7 x 1.7 x 3mm) - 20 connectors of C type - 1 hole on e..

Dzus type quick release fasteners with large rhomboid base (Type 2) at 1/12 scale, with a width of 3,6mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fi..

Dzus type quick release fasteners with rhomboid base (Type 1) at 1/12 scale, with a width of 3mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fix them w..

Pre-cut paint mask in repositionable low-adhesion paper, which fits on the body of the Italeri kit of the Bugatti Type 35B in 1/12 scale. These masks will allow you to paint correctly and precisely the color stripes and the numbers of the car instead of using the decal included in the kit.Family: ..

Decals for completing the instrument panel of the Tamiya Brabham Ford BT44B with better definition and detail. These decals include the complete dials, as well as all the indications, labels and stickers for the different buttons and switches. A message has even been added that could sometimes be se..

Set of hood latches with pin for 1/12 scale models. Includes a total of 12 closures made of resin by 3D printing. It includes 4 different positions of the closure lock so that you can give more realism to your models, by not repeating the same configuration in all the closures.Family: Bonnet pins ..

24 push buttons in scale 1/12 casted in resin, perfect to be used with cars and bikes.Family: Detail Scale: 1/12 Additional scales: 1/10 Reference: DCL-PAR025 Item: Push button Includes: resin parts Parts: 24 units..

Set of 500 button head hex socket screws with diameters of 1.0mm, 1.1mm, 1.2mm, 1.3mm and 1.4mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found. Family: Fasteners Reference: DCL-PAR075 Item: Button head hex socke..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

#NOTE: The set does NOT include a model kit...

The kit is brand new and boxed Constructed very detailed Consists entirely of Resin..

Water-slide Decals: Instruction: 1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them. 2. Cut out the decal you need (do it on cutting mat) 3. Grab t..

..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Washes are one of the oldest and most essential modelling techniques, used by all modelers on subjects and dioramas of all types and themes. AMMO by Mig Jimenez washes are developed with two different formulations to include both enamel type and acrylic type. Each type features different qualities ..

Usage A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available.Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, s..

Acrylic colours for all kinds of Fantasy and Wargame figures. The Game colour formulation greatly improves the colours application. The paint spreads very smoothly, is more fluid, opaque and contains a high pigment saturation, chosen for their brightness, maximum stability and resistance to light. c..

4BO green used by the Soviet Army as a standard for priming, corrosion protection, and camouflage color from 1941-1955. Acrylic - Authentic color with optimized formula for maximum performance with either brush or airbrush. 17 mL jar. Water soluble, odorless and non-toxic. Shake well before each us..