All Products

This water-based formula behaves as like a lacquer and has been optimised for maximum performance with both brush and airbrush. We recommended adding 30% of Cleaner & Thinner (ATOM-20500) or Cleaner & Thinner Retarder (ATOM-20501). These paints stand out for being self-levelling, and quick drying, ..

This water-based formula behaves as like a lacquer and has been optimised for maximum performance with both brush and airbrush. We recommended adding 30% of Cleaner & Thinner (ATOM-20500) or Cleaner & Thinner Retarder (ATOM-20501). These paints stand out for being self-levelling, and quick drying, ..

This paint is acrylic and formulated for maximum performance both with brush and airbrush. Water soluble, odourless, and non-toxic. Shake well before each use. Each jar includes a stainless-steel agitator to facilitate mixture. We recommend A.MIG-2000 Acrylic Thinner for correct thinning. Dries comp..

The A-Stand Hot Metal line has been formulated to simulate the iridescent burnt metal tones created by the high temperatures generated by aircraft jet engines. They can also be very useful to simulate this effect on exhaust pipes or any other metal element affected by heat and exhaust gasses. You mu..

The Candy range are paints with exceedingly intense, vivid and bright tones, ideal for obtaining truly striking and original colours on your models, dioramas and figures of civilian, science fiction, Gundam subjects and much more.Why use A-Stand?The great fluidity of A-Stand products makes them very..

The Candy range are paints with exceedingly intense, vivid and bright tones, ideal for obtaining truly striking and original colours on your models, dioramas and figures of civilian, science fiction, Gundam subjects and much more.Why use A-Stand?The great fluidity of A-Stand products makes them very..

Set contains:- 06318-1/72 YT-1300 "Millennium Falcon" PG - exterior- 06418-1/72 YT-1300 "Millennium Falcon" PG - Landing gears- 06518-1/72 YT-1300 "Millennium Falcon" PG - Cockpit & gun wells..

Set contains:PE Parts:- landing gears trays with wheelbay doors- boardig door- boardig top part with new accurate lightsPhoto etch detail set for Millennium Falcon from the original Star Wars trilogy series from Bandai PERFECT GRADE model kit in 1/72 scale...

Set contains:PE Parts:- new detail dash board- gauges on special foil or colour print for realistic illumination- wheel bay with doors- whole cockpit canopy- engine grills- intake cover mesh- parts for open service panel- parts for open nose cone- hangar service rampPhoto etch de..

Photo etch detail set for Y-Wing from the original Star Wars trilogy series from Bandai model kit in 1/72 scale. Colour print with instruments for dash board are includedPE Parts:- new detail dash board- colour print with gauges for realistic illumination- wheel bay with doors- backside wind..

Set contains:- mask for canopy windows for both sides- mask for surfacePainting masks for B-Wing from the Star Wars original trilogy. Green vinil airbrush masks are precisely cut for perfect cover of canopy windows in 1/72 scale for Bandai kit..

210 links (late model) in 1/48 th scale and a wire to obtain the track pivots...

This is a cockpit set for Kitty Hawk's FJ-2 Fury kit (1:48). It includes a corrected and detailed seat with parachute and harness in place, a detailed rear cockpit bulkhead and turtle deck, the FJ-2 specific loop antenna assembly as well as a detailed canopy rear deck...

F-4 Phantom C/L pylon, 1:48, for the Tamiya line of kits. The pylon fits on and into the moulded-on mounting tab between the Aux doors on Tamiya's kit with a simple modification (it needs to be shortened and slightly re-shaped). The pylon set comes with two sets of separate pins - one for the larger..

This is a full conversion set to build an NF-104A aerospace/astronaut trainer aircraft from the Kinetic F-104G kit. The set comes with all parts needed, some injection moulded plastic, some 3D printed, plus a turned brass pitot boom and a full set of decals by Caracal (printed by Cartograf)...

220 links (late model) in 1/48 th scale and a wire to obtain the track pivots...

Resin detail set with photo etch for AMT..

Constitution class (Refit) - WARP nacelles field grills Bring your Constitution Class NCC-1701-A (Refit) starship to life with this expertly designed set of WARP nacelles field grills. Created for the 1/350 scale Polar Lights kit, these photo-etched grills feature intricate details that stay true to..

Printed in resin with the latest 3D technology...

Please note: Tank is not included...

Please note: Tank is not included. Type 95 "HA-GO" Include:195 links in 1/35 th scale and a wire to obtain the track pivots...

170 links in 1/35 th scale and a wire to obtain the track pivots...

Full .30 cal ammunition boxes with cartridges. Printed in resin with the latest 3D technology for unparalleled detail and scale accuracy. Use Slow Dry Cyanoacrylate A.MIG-8013 for assembling this kit. Suitable for models from all manufacturers...

Super realistic and high detailed laser cut Meadow Flowers. These palms are perfect to add a final touch of realism to your diorama, vehicles or figures. Theirs size makes them optimum to scales 1:48, 1:35 or 1:32...