All Products

Wing Commander Guy Gibson, VC, DSO & Bar, DFC & Bar was the first Commanding Officer of No. 617 Squadron, which he led in the "Dam Busters" raid in 1943 which resulted in the destruction of two large dams in the Ruhr area of Germany. He was awarded the Victoria Cross.The Insignia depicts his aircr..

This standard camouflage pattern used Colours 70/71/65 and remained standard from 1940. Spinner and metal prop blades were the usual Colour 70. German national markings were remarkably consistent in size, style and placement.Aircraft that operated in North Africa were camouflaged in Colours 78/79/..

This set provides the markings for Tom Neil's Hurricane during the Battle of Britain. The serial number chosen if for the aircraft that he flew the most and is taken from his log book. As a pilot officer of junior rank he would have flown other aircraft.This set includes only the Insignia. We reco..

Mk II started in 1942, including additional armour for the pilot, radiator and engine.Mk Is were used in ground support, where it was quickly learned that destroying German tank, Truck and half-tracksWe have tried to faithfully represent the scheme used for this period.This set includes only the..

From November 1941, beginning in the Libyan desert, it had to face a new formidable opponent: the new Regia Aeronautica Macchi C.202Folgore. The Italian aircraft proved superior to the Hawker fighter(112] and, thanks to its excellent agility and a new, more powerful inline engine licence-built by ..

The Hawker Siddeley Harrier is the first of the Harrier Jump Jet series of aircraft. It was developed in the 1960's as the first operational close-support and reconnaissance fighter aircraft with vertical/short takeoff and landing (V/STOL) capabilities and the only truly successful V/STOL design of ..

..

The British Fleet Air Arm (FAA) received 1,263 F6Fs under the Lend-Lease Act; initially it was known as the Grumman Gannet Mark I. The name Hellcat replaced it in early 1943 for the sake of simplicity. The F6F-3 being designated Hellcat Mk.I, the F6F-5, the Hellcat II. The camouflage pattern varied..

The original factory finish in the late 30's was silver dope. At the outbreak of WWII camouflage was hastily applied at squadron level to the Gladiators in service. This produced a variety of patterns. The Gladiator saw action in almost all theatres during the Second World War, with a large number ..

August 1941 saw the FW190A become operational and it quickly became apparent that this new aicraft outclassed Allied aircraft.Our masks represent the standard factory finish. Mottling was applied at squadron level and differed between aircraft.We have tried to faithfully represent the scheme use..

Kit contains two plain (unpainted) resin parts...

..

Painting Mask on yellow kabuki paper..

..

F-16 Aces-II Ejection seat (Wool pad) for 1/48 F-16 kit Best fit for the Tamiya 1/48 F-16 kit. Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 1 Resin part...

F-15E/K Eagle F100 type Nozzle set (Opened) for 1/48 Academy kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 2 resin parts...

Set contains resin wheels for kit C-47 Skytrain..

..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

The Blenheim was a light bomber which saw service throughout the Second World War. It was originally developed as a Type 142, a civil airliner, in response to a challenge from Lord Rothermere to produce the fastest commercial aircraft in Europe. The Air Ministry, impressed by its performance, ordere..

The F series saw the introduction of a new splinter pattern on the 109. This was also authorised for use on the G series. The early G2/4 series had identical patterns. We have produced both a pattern 1 and a pattern 2 to allow for the variations caused by production in different factories.Please s..

The F series saw the introduction of a new splinter pattern on the 109. This was also authorised for use on the G series. The early G2/4 series had identical patterns. We have produced both a pattern 1 and a pattern 2 mask set to allow for the variations caused by production in different factories. ..

Beaufighter (often called the Beau) originally conceived as a heavy fighter. I also proved to be an effective night fighter. I was used in many roles; receiving the nicknames Rockbeau for its use as a rocket-armed ground attack aircraft and Torbeau as a torpedo bomber. It replaced the Beaufort. It s..

The full Balkenkrauz was slowly reduced as the war continued, the white area being more pronounced on the fuselage and lower wing...