All Products

Each bottle comes in a 10ml volume which can be hand brushed (with the aid of SMS Leveller Paint Additive if required) or can be thinned down as normal with SMS Acrylic Lacquer Thinners to become air brush ready...

You get 18 pieces of stars, which features three parts each ?C suitable for every painting method ?C first blue or white before the camouflage as well as similar technique of painting after camouflage is applied.The set includes 3 sheets of masks (shown in the picture). The masks are made from thin ..

Metal chain for scale models.Best for use with 1/35 AFV models.Used look. Brass/copper/rust colours mixed.Original metal colour, not painted.Doesn??t need to be painted on the modelVery easy to work with.Length: 500mmSize of the chain ring:Length: 2,8-2,9mmWidth: 1.8-1.9mm..

The set includes two sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is fle..

Suggested kit: F-4 B/J/N Phantom kits from Eduard, Monogram, Revell, Hasegawa, Zoukei-Mura, Academy, TamiyaRe-usable die-cut paint masksThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave..

Suggested use: HobbyBoss CH-47AThe set includes three sheets of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be..

B-17G Flying Fortress Yellow Tails Insignia Paint Mask Set 1/48Suggested scale: 1/48Three versions included:"Fuddy Duddy" - #44-83563 #42-97400 - USAAF 708 BS, 447 BG, 8 AF"Chuckie" - #44-8543 - USAAF 832BS, 486 BG, 8 AF"D-Day Doll" - #43-37544 - USAAF 710 BS, 447 BG, 8 AFSuggested kit: ..

The masks are re-usable.The set includes one sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be use..

The masks are re-usable.The set includes one sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over a..

PL-01 Polish Concept Tank Camouflage Paint Masks ver.1Suggested scale: 1/35Suggested kit: Takom #2127 Polish Prototype Concept Light Tank PL-01Re-usable die-cut camo mask setThe set includes three sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, whic..

20 pieces pre-cut masks for covering the outer windows before paintYou need less then 20 but the set includes some extrasThe set includes a sheet of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn??t leave any stains. The tape..

Suggested kits: Late War Messerschmitt Bf-109G/KRe-usable die-cut camo mask set..

Messerschmitt Me-262 B-1/U-1 Nightfighter Luftwaffe Insignia & Numbers Paint Mask Set 1/32Suggested scale: 1/32Suggested kit: Trumpeter #02237, Revell #04995Re-usable die-cut camo mask setThe set includes two sheets of pre-cut masks (shown in the picture). The masks are made from thin maskin..

Suggested kit: 1/16 Allied & Captured Armour & VehiclesRe-usable die-cut paint masksThe set includes five sheets of pre-cut masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn't leave any stains. The tape is tested on clear and painte..

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...

Products made in 3D by H3models are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it...