All Products

This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.metalparts+PE+resin parts+decal..

..

Wood 1 - Airbrush StencilCreate realistic wood grain patterns with an airbrush. This allows for the creation of any kinds of wood, such as freshly varnished wood, old grey wood, stained wood or even scorched wood. Article on the use of this stencil by Entoni Seperic on Aeroscale: http://www.aeroscal..

Wavy Radiator Mesh (22/10) This is a generic radiator mesh suitable for scale 1/32 aircraft. It can be cut to size and used to replace plastic kit radiator parts that are often inaccurate or overscale. Unlike generic woven meshes, this will not unravel when cut. This radiator mesh can be used to s..

This is the holder for the following saw blades: Coarse saw blade: - Medium saw blade (RB-T015)- Fine saw blade (RB-T016)- Ultra fine saw blade (RB-T017)This holder is essential as it holds the blades straight and stiffens them. This improves the cutting, it prolongs the life of the blade and preve..

Ultra-fine saw blade (48 t/cm - 120 tpi)This is a very fine saw blade and is recommended especially for the finest model-related cuts. This blade can be used to cut plastic, wood and resin. The blade is paper thin and the teeth are so fine that they require magnification to be seen (but they are the..

This is an attachment for a standard craft/hobby knife. Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by other tools.The tool comes with 4 separate wheels with the following pitch (distance between rivets):-..

Panzer Putty is a dilatant Silicon Putty. It changes its behaviour depending on the force applied. With low force you can easily shape it. A Panzer Putty ball would bounce like a rubber ball, it will splinter when hit with a hammer and breaks smooth when ripped apart. It is not oily or sticky and do..

Optional extra wheels for the RIVET-R rivet tool.This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R tool and does not include the holder and screw included in the Rivet-R package.Use this tool to scribe rivets on plastic, resin and even soft metals. This tool ..

This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 10 cm (approx 4 in). Suitable for all scales and all types of modeling.This tool works by the same principle as the hinged bending brakes that can be found in many metal worksho..

Optional "Corner" wheels for the RIVET-R MINI rivet tool.These are wheels for the Rivet-R MINI tool that available here: RB-T010This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R MINI tool and does not include the holder and screw included in the Rivet-R MINI ..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001)This tool can be used to make handles, ship ladders, etc. The tool is marked with measurements that make replicating such parts very easy. The handle dimensions can range from 1mm to 20.5mm...

This is an attachment for the Flip-R10 folding tools. This is an expansion tool for the Flip-R10 (RB-T001)This tool can be used to make parallel bends in photo-etched parts such as channels, ship catapults, ship ladders, ship armour shields, boxes, aircraft canopies, etc...

Metal Tracks, workable for left and right track!New concept, no drilling, no wire necessary. You will be able to build the right and left track in 20-30 minutes.You will not see any connectors after the build and it will be simple to adjust the track on the wheels!Scale: 1:48 / 220pcs..

This is a figure by MAiM; Modern Armies in Miniatures. The model is completely produced by a 3D printer. It comes printed in 3 peaces only. The scale is 1:35, unpainted - colour is not included...

(Type: model figures) This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Scale 1:35Resin Kit for 1x FigureUnbuild & unpaintedGlue & Color not included...

Metal Tracks, workable for left and right track!New concept, no drilling, no wire necessary.Not suitable to Marder 1A3 Tanks!..

Suitable for display bases.Perforated Steel Planking (or Marsden Matting) was extensively used by the United States in rapid building of landing strips / aircraft pens. These were used in all theatres of operations, not only in World War 2, but also in Korea and Vietnam. These are still in use in so..

The model is completely produced by a 3D printer. It comes printed in one piece only. You don't need to build the model. The kit comes unpainted, so model paints and other basic modelling tools are additionally required.The set contains 1 figure.#Please note that a 3D printed model can show some kin..

Metal Tracks, workable for left and right track!New concept, no drilling, no wire necessary. You will be able to build the right and left track in 20-30 minutes.You will not see any connectors after the build and it will be simple to adjust the track on the wheels!Scale: 1:35 / 220pcs..

Metal Tracks, workable for left and right track!New concept, no drilling, no wire necessary. You will be able to build the right and left track in 20-30 minutes.You will not see any connectors after the build and it will be simple to adjust the track on the wheels!Scale: 1:35 / 220pcs..

Metal Tracks, workable for left and right track!New concept, no drilling, no wire necessary. You will be able to build the right and left track in 20-30 minutes.You will not see any connectors after the build and it will be simple to adjust the track on the wheels!Scale: 1:35 / 220pcs..

The manholes are completely produced by a 3D printer. Each comes printed in one piece. You don't need to build the model. The kit comes unpainted, so model paints and other basic modelling tools are additionally required. #Please note that a 3D printed model can show some kind of "steps" on the mode..