All Products

Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by tracing all ..

It contains photo-etched part s, floor, seat, instrument panel, seatbelts, control column, fuselage guns...

Kit-set contains: Resin Casting Parts: Fuselage, wings (1,2 mm steel wire reinforced), horizontal and vertical fins, ailerons, tail wings. 3D printed parts: - Full Interior, propellers (2 types), undercarriage. - Spoked wheels included to the model, solid wheels. - All struts, strong black ABS PRO r..

Kit-set contains: Resin Casting Parts: Fuselage, wings (1,2 mm steel wire reinforced), horizontal and vertical fins, ailerons, tail wings. 3D printed parts: - Full Interior, propellers (2 types), undercarriage. - Spoked wheels included to the model, solid wheels. - All struts, strong black ABS PRO r..

..

..

resin parts for 3 Cannon version , Czechoslovak decals for 5 Versions..

..

40x brass parts..

40x brass parts..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

new parts: - fuselage front cover - rear fuselage fin - photo gun - fuselage pitot tube - antenna - brass barrel include: photoetched parts, 3x resin parts, brass part..

Fully printed, non-raster model consists of 189 parts, photo-etched parts, decals, color manual (28 pages) turnbuckles and rods 2,0 and 0,8 mm. The new thing is the figures - 4-person crew. Model construction: The model has three holes in each wing for rods with a diameter of 2 mm each to strengthen..

The Bucker Bu 181 was structurally based on the successful sports and training biplanes Bucker Bu 131 and Bu 133. Unlike them, however, the Bu 181 was a low-wing aircraft with fixed landing gear and a covered cockpit. The wing and tail structure was wooden, partially covered with plywood, the remain..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

2 brass parts..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..