All Products
Brand: SBS Model
SKU: SBS48064
Contains x 2 complete propellers#NOTE: The set does NOT include an aircraft model kit...
US$8.57
Brand: Flying Leathernecks
SKU: FL48-8023
This set includes four (4) BDU-57 / 59 / 60 Laser Guided Training Rounds with separate seeker heads.Careful removal of parts from print supports and minimal clean up required.Can be used with the F-14A/B/D, F/A-18A/B/C/D/E/F and AV-8B..
US$11.79
Brand: Flying Leathernecks
SKU: FL48-8136
3D ResinThis set includes twelve (12) BDU-33 25lb practice bombs...
US$7.39
Brand: SBS Model
SKU: SBS48090
This is an upgrade set, model kit is not included.The set contains 4 3D printed engines and cast resin cowlings.Products made in 3D by SBS are not assembled or painted, and there may be colour differences depending on the resin.Printing supports removed.
#Caution: Never boil in hot water as it can..
US$48.16
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8103
This set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FLM48-12
This set includes a holographic vinyl piece for the LITENING pod window and a small decal sheet with stencil data markings for the kits LAU-7 missile launchers.The decal is screen printed by Microscale...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8111
3D ResinThis set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place.Remove VG's from kit wingApply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the ji..
US$9.75
Brand: Flying Leathernecks
SKU: FL48-8065
This set includes eight (8) wing pylons, one (1) centerline pylon, seven (7) BRU-36 ejector racks, and two (2) LAU-138 BOL launchers.3D printed and designed by Richard VanZandt using photos and measurements provided by FLD, Simon Oakes, Robert Foster and David Sweetman..
US$28.93
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8063
This set includes six (6) wing pylons, two (2) centerline pylons*, seven (7) BRU-36 ejector racks and two (2) adapters used when the LAU-7 missile launcher is attached to the outboard pylons.*Different centerline pylons are configured for use with the strakes or gun pack.3D printed and designed..
US$23.02
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8018
*Designed to be a drop in fit for the Hasegawa AV-8B series of kits. Simply paint and place in intake.* Some sanding may be required around the sides to get a proper fit.Master Patterns by Daniel Tompos..
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48014
Waterslide Decals printed by Microscale (Insert printed by Cartograf). 5.5 x 8.5 inch sheet..
US$17.43
Brand: Flying Leathernecks
SKU: FLS48003
Pre-cut in .005 clear styrene, this set includes enough HUD glass for six (6) aircraft. They correct the shape and thickness of the kit supplied parts...
US$6.20
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8001
This item is 3D printed and is ready to install. "Glass" cut in .005 clear styrene also included. Designed to fit the Hasegawa 1/48 AV-8B kits...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8112
3D ResinThis set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra..
US$9.75
Pre-Order
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8062
This set includes two (2) fuel tanks, each made up of three (3) parts. Tanks are hollow with keyed tail sections for port and starboard configurations.Based on the AERO-1D, these tanks feature details unique to those carried by the AV-8B and are the only accurate tanks for the Harrier available. ..
US$14.15
Brand: Flying Leathernecks
SKU: FL48-8135
3D ResinThis set includes eight (8) AOA Probes. Can be used on the F/A-18A-D, AV-8B, A-6E, EA-6B and several others...
US$7.39
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8129
3D ResinDesigned by Richard VanZandt, this set includes one (1) pod, comprised of three parts. Main body, alignment plug, and the tail section. Assembly required after minimal cleanup of parts...
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8075
This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm.CAD by Craig Sargent..
US$9.75
Pre-Order
Brand: Flying Leathernecks
SKU: FL48-8008
AN/ALQ-144, ready to paint and attach to your model.For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10..
US$7.39
Brand: Flying Leathernecks
SKU: FL48-8033
This set includes 6 buckets that can be used to replace those found in kits that may be under detailed...
US$7.39
Brand: Flying Leathernecks
SKU: FL48-8032
This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts...
US$7.39
Brand: Flying Leathernecks
SKU: FL48-8138
3D ResinThis set contains one (1) Right Handed AN/AAQ-28 LITENING Pod in the deployed position.Used on USMC F/A-18, EA-6B, Tornado, and TyphoonVery light sanding is required to remove print support nibs from bottom of pod. Comes packaged as shown in the photo.Designed by Sandro Maljic..
US$9.75