Decalcas

Set of pneumatic fittings from the Decalcas "Paint & Go" range to detail the brake, cooling and fuel systems of your models at any scale. including variants of straight and curved pieces with a 1.2mm diameter outlet. They are executed with the usual precision and realism found in Decalcas, products,..

Set of pneumatic fittings from the Decalcas " Paint & Go" range to detail the brake, cooling, fuel systems of your models at any scale. including variants of straight and curved pieces with the 0.8mm diameter outlet. They are executed with the usual accuracy and realism of Decalcas, and parts with d..

Black decal featuring a small textured pattern, designed to give a slightly rough finish to the parts where it is applied.Family: Decals Scale: 1/20 Additional scales: 1/16;1/12;1/9;1/8;1/6 Reference: DCL-PAT011 Item: Texturized pattern - type 1 - Soft Includes: water slide decals..

Tyres sidewall white chalk marking decals in 1/20 scale: An extensive decal sheet with a variety of white numbers and markings such as those commonly found on Formula 1 and GTs car tires. Includes inscriptions such as "practice", "set", "test" Family: Logotypes Scale: 1/20 Additional scales: 1/18 Re..

A super interesting reference by Decalcas, including all the Marlboro and GoodYear logos you need for recreating the versions racing at Germany, Austria, France, Nederlands, England, Japan and Monaco Grand Prix in 1976. The decals are additional to the ones already included in the kit.Family: Mark..

Decalcas: Marking / livery 1/12 scale - Yamaha YZR500 sponsored by Dainese #1 - Kenny Roberts (US) - Motorcycle World Championship 1979 - water slide decals manufactured with digital technology -for Tamiya references TAM14001 and TAM14026..

Set of toggle switches with protection caps in 1/12 scale. Includes 20 switches in total, 10 with closed lids, and another 10 with open lids.Family: Detail Scale: 1/12 Reference: DCL-PAR019 Item: Toggle switch with guard Includes: resin parts Parts: 10 + 10 units..

Fairing windshield and anti-slip fuel tank pads for the Suzuki GSX-RR, made of 0.2mm thick transparent laminated material that replaces the transparent plastic parts of the kit, and decals with a 3D effect. The windshield is already die-cut, adjusting to the model without the need of further modific..

Pre-cut paint mask in repositionable low-adherence paper, which fits over the different parts of the Tamiya model to be protected in order to carry out the correct painting process. With the Decalcas mask it is no longer necessary to spend time cutting the complicated silhouettes of the mask provide..

Complete wheel set including BBS rims with Pilot Sport tires in 1/24 scale, along with air valves and hubs with central nut to detail the Nunu Porsche 911 RSR GT3 Le Mans 2018 kit. This set allows you to replace the rims and tires of the kit, which lack detail and are out of scale. Decalcas has paid..

Long springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so ..

Set of bonnet latches in 1/12 scale. Includes a total of 8 closures made of resin and elastic rubber by 3D printing. The extreme detail with which these closures are designed and manufactured provide greater realism to the models, since the pieces can be attached allowing the mobility of the rubber ..

Complete 1/12 scale chain gear drive set that includes 3 rear sprockets with different dimensions (35, 37 and 49 teeth), a 15-tooth front drive sprocket, 156 links, and different nuts and screws to detail the anchoring of the pinion and crown. Whether you are making a scratch motorcycle or want to i..

Pre-cut paint mask in repositionable, low-adhesion paper, that fits over the transparent parts and bodywork of Meng 1/12 scale kit of the Shelby American Team Ford GT40 Mk II. These masks, of a higher quality than those included in the model, will allow you, in addition to being able to paint the tr..

Dzus type quick release fasteners with large rhomboid base (Type 2) at 1/12 scale, with a width of 3,6mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fi..

Dzus type quick release fasteners with rhomboid base (Type 1) at 1/12 scale, with a width of 3mm. Made in resin by 3D printing, they reproduce all the details, such as the mounting rivets. They are extremely thin, and have a 0.8mm diameter support rod for mounting, which will allow you to fix them w..

24 push buttons in scale 1/12 casted in resin, perfect to be used with cars and bikes.Family: Detail Scale: 1/12 Additional scales: 1/10 Reference: DCL-PAR025 Item: Push button Includes: resin parts Parts: 24 units..

Set of 500 button head hex socket screws with diameters of 1.0mm, 1.1mm, 1.2mm, 1.3mm and 1.4mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found. Family: Fasteners Reference: DCL-PAR075 Item: Button head hex socke..